MSZ 13502-1976 《千米和百米圆柱》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SJ T 31089-1994 KH4682—5型切筋冲床完好要求和检查评定方法.pdf

SJ T 31090-1994 6-CTVH-B型切割机完好要求和检查评定方法.pdf

SJ T 31091-1994 晶片内圆切片机完好要求和检查评定方法.pdf

SJ T 31092-1994 晶片数控切割（划片）机完好要求和检查评定方法.pdf

SJ T 31093-1994 陶瓷劈刀外圆磨床完好要求和检查评定方法.pdf

SJ T 31094-1994 GLP—30型陶瓷劈刀研磨机完好要求和检查评定方法.pdf

SJ T 31095-1994 劈刀研磨装置完好要求和检查评定方法.pdf

SJ T 31096-1994 精密硅片磨床完好要求和检查评定方法.pdf

SJ T 31097-1994 TDH—4C4TO型去飞边机完好要求和检查评定方法.pdf