MSZ 18225-1953 《成套家具的书桌》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST R 50034-1992 Electromagnetic compatibility Asynchronous motors of voltage about 1000 V Limits and test methods on immunity to electromagnetic disturbance《电磁兼容性 电压约为1000 V的异步电动.pdf

GOST R 50035-1992 Combined broaches with diameter from 50 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from .pdf

GOST R 50036-1992 Combined broaches with diameter from 90 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from .pdf

GOST R 50037-1992 Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from .pdf

GOST R 50038-1992 Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside dimeter with modul from 3 .pdf

GOST R 50039-1992 Textile machinery and accessories Cones for yarn winding (cross wound) Half angle of the cone 420- Dimensions and checking methods《纺织机械和配件 纱线卷绕用锥筒(交叉卷绕) 圆锥半角4？0- .pdf

GOST R 50040-1992 Textile machinery and accessories Cones for yarn winding (cross wound) Half angle of the cone 915- Dimensions and checking methods《纺织机械和配件 纱线卷绕用锥筒(交叉卷绕) 圆锥半角9？5- .pdf

GOST R 50041-1992 Textile machinery and accessories Cones for yarn winding (cross wound) Half angle of the cone 330- Dimensions and checking methods《纺织机械和配件 纱线卷绕用锥筒(交叉卷绕) 圆锥半角3？0- .pdf

GOST R 50042-1992 Textile machinery and accessories Tubes for ring-spinning doubling and twisting spindles taper 1 38 and 1 64 Dimensions《纺织机械和配件 环锭纺纱管 倍捻锭 纺锥1 38和1 64 尺寸规格》.pdf