MSZ KGST 227-1975 《包装 尺寸系统》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 21552-1984 Computers technique General technical requirements acceptance methods of testing marking packing transportation and storage《计算技术工具 一般技术要求、验收规则和试验方法》.pdf

GOST 21553-1976 Plastics Methods for determination of melting temperature《塑料 融点测定法》.pdf

GOST 21554 1-1981 Sawn timber and blanks Methods for determination of modulus of elasticity in static bending《锯材和坯料 静弯弹性系数测定法》.pdf

GOST 21554 2-1981 Sawn timber and blanks Method for determination of ultimate strength in static bending《锯材和坯料 静变强度极限测定法》.pdf

GOST 21554 3-1982 Sawn timber and blanks Method for control of strength at bending tension and compression《锯材和坯料 抗弯曲、拉伸和压缩强度检验方法》.pdf

GOST 21554 4-1978 Sawn timber and semi-manufactures Method for determining the ultimate strength in comression parallel to grain《锯材和坯料 纵向挤压强度极限测定法》.pdf

GOST 21554 5-1978 Sawn timber and semi-manufactures Method for determining the ultimate strength in tension parallel to grain《锯材和坯料 纵向拉伸的强度极限测定法》.pdf

GOST 21554 6-1978 Sawn timber and semi-manufactures Method for determining the ultimate strength in shearing parallel to grain《锯材和坯料 顺纤维方向劈开的强度极限测定法》.pdf

GOST 21554 7-1978 Sawn timber and semi-manufactures Method of determination of ultimate strength in bearing perpendicular《锯材和坯料 垂直于纤维方向挤压的强度极限测定法》.pdf