MSZ KGST 234-1975 《模板的节拍流动主要要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 2582-1993 钛合金内六角圆柱头螺钉.pdf

QJ 2583-1993 钛合金十字槽盘头螺钉.pdf

QJ 2584-1993 钛合金十字槽沉头螺钉.pdf

QJ 2585-1993 钛合金螺栓、螺钉技术条件.pdf

QJ 2586.1-1993 立方氮化硼硬质合金焊接式外圆车刀.pdf

QJ 2586.2-1993 立方氮化硼硬质合金焊接式内孔车刀.pdf

QJ 2586.3-1993 立方氮化硼硬质合金焊接式普通螺纹车刀.pdf

QJ 2586.4-1993 立方氮化硼硬质合金焊接式切槽刀.pdf

QJ 2586.5-1993 立方氮化硼硬质合金焊接式车刀技术条件.pdf