MSZ KGST 682-1979 《采伐斧，斧头技术产品的检测和技术要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 26506-1985 Tools for cold-forming machines Dies for cutting ofnut blanks Construction and dimensions《自动冷冲压机的工具 螺母毛坯切断用阴模 结构及尺寸》.pdf

GOST 26507-1985 Tools for cold-forming machines 1 St station dies Construction and demensions《自动冷冲压机的工具 第一工步阴模 结构及尺寸》.pdf

GOST 26508-1985 Tools for cold-forming machines 2Nd station dies Construction and dimensions《自动冷冲压机的工具 第二工步阴模 结构及尺寸》.pdf

GOST 26509-1985 Tools for cold-forming machines 3rd station dies Construction and dimensions《自动冷冲压机的工具 第三工步阴模 结构及尺寸》.pdf

GOST 26510-1985 Tools for cold-forming machines 4Th station dies Construction and dimensions《自动冷冲压机的工具 第四工步阴模 结构及尺寸》.pdf

GOST 26511-1985 Tools for cold-forming machines 5Th station dies Construction and dimensions《自动冷冲压机的工具 第五工步阴模 结构及尺寸》.pdf

GOST 26512-1985 Tools for cold-forming machines 1St station punches Construction and dimensions《自动冷冲压机的工具 第一工步冲头 结构及尺寸》.pdf

GOST 26513-1985 Tools for cold-forming machines 2-D station punches Construction and dimensions《自动冷冲压机的工具 第二工步冲头 结构及尺寸》.pdf

GOST 26514-1985 Tools for cold-forming machines 3rd station punches Construction and dimensions《自动冷冲压机的工具 第三工步冲头 结构及尺寸》.pdf