1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2014 by Navistar, Inc. AUGUST 2014 Page 1 of 1 NAVISTAR, INC. CEMS (ENGINEERING MATERIAL SPECIFICATION) N
2、UMBER: CEMS A-0, PART II TITLE: System of Steel Classification for Standard Steels CURRENT ISSUE DATE: August 2014 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: February 2012 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION Th
3、is specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory li
4、mits prior to use. Change Notice: Made Void. This specification is VOID, and has been replaced by MPAPS A-0 Part II. For questions, contact MaterialsEngineeringN VOID This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Stan
5、dards. Suppliers are required to assume all patent liability. 2014 by Navistar, Inc. AUGUST 2014 Page 1 of 1 NAVISTAR, INC. CEMS (ENGINEERING MATERIAL SPECIFICATION) NUMBER: CEMS A-0, Part II, APPX TITLE: System of Steel Classification for Standard Steels - Appendix CURRENT ISSUE DATE: AUGUST 2014 W
6、RITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: February 2012 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to
7、address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. This specification is VOID. Content has been incorporated into MPAPS A-0 Pt II. For questions, contact MaterialsEngineeringN VOID
