1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. AUGUST 2009 Page 1 of 2 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIF
2、ICATION) NUMBER: CEMS BT-Index TITLE: Index of BT Test Methods CURRENT ISSUE DATE: AUGUST 2009 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: October 2001 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may
3、involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Ch
4、ange Notice: Replaced “International Truck and Engine Corporation” with “Navistar, Inc.” per corporate directive; all active BT test methods updated. Spec Number TITLE DATE Author CEMS- BT-INDEX Index of BT Test Methods August 2009 Materials Engineering CEMS-BT-1 Foaming Test August 2009 Materials E
5、ngineering CEMS-BT-2 Insoluble Deposits Test (U.S. Patent No. 2,931,219) August 2009 Materials Engineering CEMS-BT-3 Corrosion Test August 2009 Materials Engineering CEMS-BT-4 Saponifiable Matter August 2009 Materials Engineering CEMS-BT-5 Copper Corrosion Test August 2009 Materials Engineering CEMS
6、-BT-7 Water Tolerance Test August 2009 Materials Engineering CEMS-BT-9 Humidity Corrosion Test August 2009 Materials Engineering CEMS-BT-10 Oxidation Corrosion Test August 2009 Materials Engineering CEMS-BT-13 Stability Heating Test August 2009 Materials Engineering CEMS-BT-17 Oxidation Stability Te
7、st August 2009 Materials Engineering CEMS-BT-18 Ash of Ramsbottom Carbon Residue Test August 2009 Materials Engineering CEMS-BT-20 Four-Square Test for Gear Lubricants August 2009 Materials Engineering CEMS-BT-21 Hydraulic Performance Test August 2009 Materials Engineering CEMS-BT-22 Power Take-Off
8、Clutch Flywheel Test August 2009 Materials Engineering CEMS-BT-25 Fuel Stability Test August 2009 Materials Engineering CEMS-BT-26 Solid Matter Test August 2009 Materials Engineering CEMS-BT-27 Ash Content Test August 2009 Materials Engineering CEMS-BT-28 Compatibility and Dispersability Test August
9、 2009 Materials Engineering CEMS-BT-29 Test for Leak Stoppage of Cooling System Stopleak Compounds August 2009 Materials Engineering CEMS-BT-30 Foam Test with Water August 2009 Materials Engineering CEMS-BT-31 Volatile Matter Test August 2009 Materials Engineering CEMS-BT-32 Apparent Density of Soli
10、d Matter Test August 2009 Materials Engineering CEMS-BT-33 pH Value Test August 2009 Materials Engineering CEMS-BT-34 Oil Content Test August 2009 Materials Engineering CEMS-BT-35 Stain Test for Paint Finishes August 2009 Materials Engineering CEMS-BT-36 Grease Extraction August 2009 Materials Engin
11、eering CEMS-BT-38 Test for Water Content in Air Conditioner Refrigerant August 2009 Materials Engineering CEMS-BT-39 Determination of Nonabsorbable Gas in Air Conditioner Refrigerant August 2009 Materials Engineering NUMBER: CEMS BT-Index TITLE Index of BT Test Methods CURRENT ISSUE DATE: AUGUST 200
12、9 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. AUGUST 2009 Page 2 of 2 Spec Number TITLE DATE Author CEMS-BT-40 Determination o
13、f Equilibrium Boiling Point and High Boiling Impurities in Air Conditioner Refrigerant. August 2009 Materials Engineering CEMS-BT-41 Determination of the Presence of Chloride Ions in Air Conditioner Refrigerant August 2009 Materials Engineering CEMS-BT-43 Barium, Calcium, Magnesium, and Zinc in Oil
14、August 2009 Materials Engineering CEMS-BT-44 Phosphorus in Oil August 2009 Materials Engineering CEMS-BT-46 Reducing Ion Test August 2009 Materials Engineering CEMS-BT-47 Stability Test for Distillate Fuel August 2009 Materials Engineering CEMS-BT-48 Determination of Water & Methanol in Windshield Washer Solvent August 2009 Materials Engineering CEMS-BT-49 Determination of Molybdenum Disulfide in Lubricants August 2009 Materials Engineering
