NAVISTAR ESP N-6 121-PP-2015 VOID - Rectangular Uniform Section Retaining Rings - Preferred Parts (Noun Code - 7175).pdf

上传人:brainfellow396 文档编号:962717 上传时间:2019-03-10 格式:PDF 页数:1 大小:91.67KB
下载 相关 举报
NAVISTAR ESP N-6 121-PP-2015 VOID - Rectangular Uniform Section Retaining Rings - Preferred Parts (Noun Code - 7175).pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. July 2015 Page 1 of 1 NAVISTAR, INC. Engineering Standard Parts NUMBER: ESP-N-6.1

2、21-PP TITLE: Rectangular Uniform Section Retaining Rings Preferred Parts (Noun Code 7175) CURRENT ISSUE DATE: July 2015 WRITTEN/REVIEWED BY: Corporate Technical Standards APPROVED BY: Corporate Technical Standards SUPERSEDES ISSUE OF: August 2014 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION Change Notice: Made VOID. This specification is VOID with no Replacement. For questions, contact MaterialsEngineeringN VOID

展开阅读全文
相关资源
猜你喜欢
  • STAS SR ISO 804-1995 Aluminium oxide primarily used for the production of aluminium -Preparation of solution for anatysis - Method by alkaline fusion《主要用于生产铝的氧化铝.用于分析的溶液的制备.加碱熔化方法》.pdf STAS SR ISO 804-1995 Aluminium oxide primarily used for the production of aluminium -Preparation of solution for anatysis - Method by alkaline fusion《主要用于生产铝的氧化铝.用于分析的溶液的制备.加碱熔化方法》.pdf
  • STAS SR ISO 805-1995 Aluminium oxide primarily used for the production of aluminium -Determination of iron content - 1 10 - Phenanthroline photometric rnethod《主要用于生产铝的氧化铝.铁含量的测定-1 .pdf STAS SR ISO 805-1995 Aluminium oxide primarily used for the production of aluminium -Determination of iron content - 1 10 - Phenanthroline photometric rnethod《主要用于生产铝的氧化铝.铁含量的测定-1 .pdf
  • STAS SR ISO 806-1994 Aluminium oxide primarily uaed for the production of aluminium -Determination of loss of mass at 1000 degrees C and 1200 degrees C《主要用于生产铝的氧化铝.在1000摄氏度和1200摄氏度.pdf STAS SR ISO 806-1994 Aluminium oxide primarily uaed for the production of aluminium -Determination of loss of mass at 1000 degrees C and 1200 degrees C《主要用于生产铝的氧化铝.在1000摄氏度和1200摄氏度.pdf
  • STAS SR ISO 815+A1-1995 Rubber vulcanized or thermoplastic - Determination of compression set at ambient elevated or low temperatures《橡胶,硫化或热塑性.在常温,高温或低温下测定压定 》.pdf STAS SR ISO 815+A1-1995 Rubber vulcanized or thermoplastic - Determination of compression set at ambient elevated or low temperatures《橡胶,硫化或热塑性.在常温,高温或低温下测定压定 》.pdf
  • STAS SR ISO 835-1-1996 Laboratory glassware - Graduated pipettes Part 1  General requirements《实验室玻璃器皿.分度滴管.第1部分:一般要求》.pdf STAS SR ISO 835-1-1996 Laboratory glassware - Graduated pipettes Part 1 General requirements《实验室玻璃器皿.分度滴管.第1部分:一般要求》.pdf
  • STAS SR ISO 857-1994 Welding brazing and soldering proceses Vocabulary《焊,硬钎焊和软焊过程.词汇表》.pdf STAS SR ISO 857-1994 Welding brazing and soldering proceses Vocabulary《焊,硬钎焊和软焊过程.词汇表》.pdf
  • STAS SR ISO 868-1995 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)《塑料和硬橡胶.通过硬度计测定压痕硬度(肖氏硬度)》.pdf STAS SR ISO 868-1995 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)《塑料和硬橡胶.通过硬度计测定压痕硬度(肖氏硬度)》.pdf
  • STAS SR ISO 883-1994 Indexable harmetal (carbide) inserts with rounded corners without fixing hole - Dimensions《带圆角,没有固定孔的可加索引的硬金属 (硬质合金)刀片.尺寸 》.pdf STAS SR ISO 883-1994 Indexable harmetal (carbide) inserts with rounded corners without fixing hole - Dimensions《带圆角,没有固定孔的可加索引的硬金属 (硬质合金)刀片.尺寸 》.pdf
  • STAS SR ISO 900-1996 Aluminium oxide primarily used for the production of aluminium -Determination of titanium content - Diantipyrylmethane photometric method《主要用于铝制品生产的三氧化二铝.钛含量的测.pdf STAS SR ISO 900-1996 Aluminium oxide primarily used for the production of aluminium -Determination of titanium content - Diantipyrylmethane photometric method《主要用于铝制品生产的三氧化二铝.钛含量的测.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1