1、NAVISTAR, INC. Material, Parts, and Process Specifications (MPAPS) NUMBER: MPAPS G-5 PART I Former Designation: CEMS G-5 Parts IA & IB TITLE: Paint Material and Finished Product Requirements CURRENT REV No.: 1408 DATE: AUGUST 2014 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engin
2、eering SUPERSEDES: Rev. 1404 April 2014 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is re
3、sponsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. This specification is VOID, and has been replaced by MPAPS G-5. For questions, contact MaterialsEngineeringN This document is restricted and ma
4、y not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2014 by Navistar, Inc. AUGUST 2014 Page 1 of 1 VOID This document is restricted and may not be sent outside Navistar, Inc. or reproduced wi
5、thout permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2014 by Navistar, Inc. AUGUST 2014 Page 1 of 1 NAVISTAR, INC. Material, Parts, and Process Specifications (MPAPS) NUMBER: MPAPS G-5, PART I APPENDIX Former Designation: CEMS G-5 Part I Appendi
6、x TITLE: Paint - Part I Appendix CURRENT Rev. No.: 1408 DATE: AUGUST 2014 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: Rev. 1406 - June 2014 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous mat
7、erials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. This specification is VOID, and has been replaced by MPAPS G-5 APPENDIX. For questions, contact MaterialsEngineeringN VOID
