1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2017 by Navistar, Inc. APRIL 2017 Page 1 of 2 NAVISTAR, INC. Material, Parts, and Process Specifications
2、(MPAPS) NUMBER: MPAPS G-8 Former Designation: MPAPS G-5 Appendix TITLE: Paint Color, Gloss, and Grade Nomenclature CURRENT Rev. No.: 1704 DATE: APR. 2017 WRITTEN/REVIEWED BY: S. Brailey APPROVED BY: R. Goluch SUPERSEDES: 1608 Aug 2016 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVI
3、SION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regula
4、tory limits prior to use. 1.0 PAINT CLASSIFICATION Paints are classified by use of designations for both appearance and grade, separated by a dash. Color and gloss are specified in the appearance designation with gloss being 83 min unless otherwise indicated by a letter. Paint properties and special
5、 requirements are specified in the grade designation. A typical paint identification number is shown by the following example below. Example: 9219 Winter White. 1.1 Color Requirement This consists of one digit indicating the basic color and either three digits or a letter and two digits indicating t
6、he serial number of the particular shade of the basic color. 1.2 Gloss Requirement Minimum gloss requirements are indicated by suffix letters to the color number in the appearance designation. No suffix will be used when full gloss is required or when specifying primers and casting sealers. 1.3 Text
7、ure Requirement When texturing is desired, the suffix “T” is added after the gloss indicator in the appearance designation. Texturing always requires a gloss designation. 1.4 Grade Designation The grade designation consists of a suffix. The suffix is used to indicate a special requirement. For examp
8、le: “-T.” The “T” represents a special requirement (higher baking temperature). When referring to a specific paint, such as on a purchase order, the complete appearance and grade designation will be specified along with the color name. This will help avoid confusion. Examples: NAV 0483 - Grade 18 Ye
9、llow NAV 0001L HS Grade 32 Black 1.4.1 When referring only to color, as in pamphlets or letters, appearance designation and color name will be specified. The grade designation is not necessary. Examples: NAV 4421 School Bus Yellow NAV 0311 Omaha Orange NUMBER: MPAPS G-8 TITLE: Paint Color, Gloss, an
10、d Grade Nomenclature REVISION: 1704 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2017 by Navistar, Inc. APRIL 2017 Page 2 of 2 Example: REVISION HISTO
11、RY Revision Level Change Approved by Date Approved 1608 Changed designation to MPAPS G-8 from MPAPS G-5 Appendix. Removed grade designation table and conversions chart. R. Goluch 8/4/2016 1704 Updated grade designation to be consistent with revised version of MPAPS G-5. Updated examples of color cal
12、louts. R. Goluch 4/28/2017 Appearance Designation Grade Designation 4 3 8 4 M T - T Basic Color Shade of Basic Color Gloss 60 Textured Special Requirements 0 = Black 1 = Brown (buff, tan, cream) 2 = Red (coral, pink) 3 = Orange 4 = Yellow (chartreuse, ivory) 5 = Green 6 = Blue 7 = Violet (mauve) 8 =
13、 Gray 9 = White A = 85 5 B = 75 5 C = 65 5 D = 55 5 E = 45 5 F = 35 5 G = 25 5 H = 15 5 J = 10 5 K = 15 - 20 L = 10 - 15 M = 5 - 10 N = 2 - 5 A - Hot Spray Applied T - Higher Baking Temperature W - Water Borne HS - High Solids Crackle Note: when the first digit is zero and the second is a number other than zero, the second digit will designate the color family. Example: 0311 Orange. NAV Industry Designation for NAVISTAR Color numbers
