1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 1 NAVISTAR, INC. Material, Parts, and Process Specifications (
2、MPAPS) NUMBER: MPAPS S-D-0.0 Former Designation: ESP-D-0.0 TITLE: Table of Contents Section D Thread Generating Screws English Series CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-D-0.0 - January 2001 PRINTED COPIES
3、OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health prac
4、tices and to determine the applicability of regulatory limits prior to use. Change Notice: Changed to New MPAPS format. Slotted and Cross Recess Tapping Screws- English Series MPAPS S-D-1.101-GS/PL Self-Drilling Tapping Screws- English Series MPAPS S-D-40.101-GS/PL Mechanical and quality Requirement
5、s for Tapping Screws - English Series MPAPS S-D-100.101-GS/PL Penetration Gages and Gaging for Type 1 Cross Recess Tapping and Wood Screws - English Series MPAPS S-D-200.101-GS/PL Wobble Gage and Gaging for Cross Recess Tapping and Wood Screws - English Series MPAPS S-D-200.102-GS/PL Recommended Hole Sizes for Tapping Screws - English Series MPAPS S-D-300.101-GS/PL
