1、 This document is restricted and may not be sent outside International Truck and Engine Corporation or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. Ge32001 by International Truck and Engine Corporation. AUGUST 2001 Page 1 of
2、 1 INTERNATIONAL TRUCK AND ENGINE CORPORATION TMS (TRUCK MATERIAL SPECIFICATION) NUMBER: TMS-7089 TITLE: Plastic Gears - Speedometer REVISION: B-1 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering DATE ISSUED: August 2001 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR
3、 CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicabil
4、ity of regulatory limits prior to use. Change Notice: Reformatted and Editorial Changes Reference: File 30-14 Keywords: Plastic Speedometer Gears RESTRICTED ISSUE Details of this specification are proprietary in nature and are not for general distribution. For further information, contact Materials Engineering at TDTC. Materials Engineering Truck Development and Technology Center 2911 Meyer Road Post Office Box 1109 Fort Wayne, Indiana 46801-1109
