1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2014 by Navistar, Inc. FEBRUARY 2014 Page 1 of 1 NAVISTAR, INC. TMS (TRUCK MATERIAL SPECIFICATION) NUMBER
2、 TMS-9540 srr TITLE: Quality Requirements for Front Axle and Rear Axle Assemblies CURRENT REV No.: 1402 DATE: Feb. 2014 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: Rev. 1312 Dec. 2013 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION T
3、his specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. Reference: File:02 Keywords: Front axles, rear axles, axle assemblies. This specification is VOID, and is replaced by MPAPS P-9540. For questions, contact MaterialsEngineeringN VOID
