1、INCH-POUND AN6236 Rev 5 18 June 2008 SUPERSEDING AN6236 Rev 4 27 Mar 1951 MILITARY SPECIFICATION SHEET FILTER ELEMENT - HYDRAULIC REPLACEABLE MICRONIC RESERVOIR TYPE Inactive for new design, dated 22 January 1999. This specification is approved for use by all Departments and Agencies of the Departme
2、nt of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-F-5504. FIGURE 1. Filter element dimensions and configuration. AMSC N/A FSC 1650 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-
3、AN6236 Rev 5 TABLE I. Element dimensions. Part or Identification Number (PIN) Capacity gpm A +.000 -.063 Oil displacement wet (max) cu in Weight dry max lb. AN6236-1 7.50 1.969 25 0.60 AN6236-2 15.00 4.000 40 0.90 AN6236-3 30.00 8.063 65 1.80 REQUIREMENTS: 1. Material: See MIL-F-5504, the procur
4、ement specification. 2. Finish: See MIL-F-5504, the procurement specification. NOTES: 1. These elements are for use with hydraulic reservoirs. 2. These elements are qualified items; the suppliers are listed in QPL-5504. 3. Dimensions are in inches. 4. Tolerances are as specified in table I and on fi
5、gure 1. 5. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. CONCLUDING MATERIAL Custodians: Preparing activity: Army-AV Navy-AS Navy-AS Air Force-99 (Project 1650-2008-004) Review ac
6、tivities: Army-MI Navy-MC, SA, SH Air Force-71 DLA-CC, GS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
