1、DOD-C-29574 bL 77777Ob 0087817 B A- 01-17 MILITARY SPECIFICATION CELL, STORAGE. SILVER-ZINC ALKALINE TYPE (FOR DEEP SUBMERGENCE APPLICATIONS) (METRIC) This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agen
2、cies of the Department of Defense. 1. SCOPE 1.1 Scope, This specification covers silver-zinc alkaline storage cells used in a pressure compensated system subjected directly to sea pressures and temperatures. 2. APPLICABLE DOCUMENTS 2.1 Issues of documents. The following documents, of the issue in ef
3、fect on date of invitationloT-6iz or request for proposal, form a part of this specification to the extent specified herein, SPECIFICATIONS FEDERAL QQ-B-613 - Brass, Leaded and Nonleaded: Flat Products (Plate, Bar, Sheet, and Strip). QQ-B-626 - Brass, Leaded and Nonleaded: Rod, Shapes, Forgings, and
4、 Flat Products with Finished Edges (Bar and Strip). QQ-B-637 - Brass, Naval: Rod, Wire, Shapes, Forgings, and Flat Products with Finished Edges (Bar, FlkC Wire, and Strip), QQ-B-639 - Brass, Naval: Flat Products (Plate, Bar, Sheet, and Strip). QQ-B-650 - Brazing Alloy, Copper, Copper-Zinc, and Coppe
5、r-Phosphorus. QQ-B-654 - Brazing Alloy, Silver. QQ-C-502 - Copper Rods and Shapes; and Flat Products with Finished Edges (Flat Wire, Strips and Bars). QQ-C-576 - Copper Flat Products with Slit, Slit and Edge - Rolled, Sheared, Sawed, or Machined Edges, (Plate, Bar, Sheet, and Strip). QQ-N-290 - Nick
6、el Plating (Electrodeposited). QQ-S-365 - Silver Plating, Electrodeposited; General Requirements For. PPP-B-566 - Box, Folding Paperboard. PPP-B-576 - Box, Wood, Cleated, Veneer, Paper Overlaid. PPP-B-585 - Boxes, Wood, Wirebound. PPP-B-601 - Boxes, Wood, Cleated-Plywood. PPP-B-621 - Boxes, Wood, Na
7、iled and Lock-Corner. PPP-8-636 - Boxes, Shipping, Fiberboard. PPP-B-640 - Boxes, Fiberboard, Corrugated, Triple-Wall. PPP-B-676 - Boxes, Setup. PPP-C-300 - Chemicals, Liquid: Packaging and Packing of. MIL-P-116 - Preservation-Packaging, Methods of. MIL-B-7883 - Brazing of Steels, Copper, Copper All
8、oys, Nickel Alloys, MILITARY Aluminum and Aluminum Alloys. Beneficial coments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 3112, Department of the Navy, Washington, DC 2
9、0362 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. I FSC 6140 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DOD-C-24574 bL m 7799706 0087820 4 DOD-C-2459
10、4 (CH) MILITARY (Continued) DOD-P-15816 WD-P-15817 MIL-1-45208 MIL-P-46120 STANDARDS MILITARY MIL-STD-105 MIL-STD-129 Parts, Hard Rubber for Use with Submarine Storage Parts, Synthetic Rubber, for Use with Batteries or in Inspection System Requirements. Plastic Molding and Extrusion Material, Polysu
11、lfone. Batteries (Metric). Battery Compartment of Submarines (Metric). Sampling Procedures and Tables for Inspection by Marking for Shipment and Storage. Attributes. (Copies of specifications, standards, drawings, and publications required by contractors in connection with specific acquisition funct
12、ions should be obtained from the contracting activity or as directed by the contracting officer.) the extent-i- Unless otherwise indicated, the issue in effect on date of invitation for bids or request for proposal shall apply. 2.2 Other ublications. The following documents form a part of this speci
13、fication to UNIFORM CLASSIFICATION COMMITTEE AGENT Uniform Freight Classification Ratings, Rules and Regulations Agent, Tariff Publication Officer, Room 1106, 222 South Riverside Plaza, Chicago, IL 60606.) (Application for copies should be addressed to the Uniform Classification Committee NATIONAL M
14、OTOR FREIGHT TRAFFIC ASSOCIATION, INC. AGENT National Motor Freight Classification (Application for copies should be addressed to the National Motor Freight Traffic Association, Inc., ATA TRAFFIC Dept., 1616 “P“ Street, N.W., Washington, DC 20036.) CODE OF FEDERAL REGULATIONS DEPARTMENT OF TRANSPORT
15、ATION Title 49 - Transportation. (Application for copies should be addressed to the Superintendent of Documents, (Technical society and technical association specifications and standards are generally Government Printing Office, Washington, DC 20402.) available for reference from libraries. and usin
16、g Federal agencies.) They are also distributed among technical groups 3. REQUIREMENTS 3.1 Sam le for first article ins ection. Prior to beginning production, three cells shall be esis shall be made and a report shall be prepared in accord- _-_- - ance wi PPP-B-621, class 1; PPP-B-576, class 1; or PP
17、P-8-585, class II may also be used. Container Closure and reinforcing as applicable, shall be in accordance with the applicable container specification or appendix thereto. board containetg to PPP-B-636, class domestic, as specified in Department of Transportation Regulations (WT), Title 49, section
18、 173.260, subpart E, gross mass shall not exceed 30 kg. containers specified in 5.2.2.3 with suitable padding and separators between the electrolyte carboys and inside faces of the wood containers. Boxes shall be 5.2.2.3 Re air arts and accessories (less electro1 te). Repair parts and accessories Co
19、ntainer and style selection shall be at the option of the contractor. 5.2.2.4 Electro1 te. Electrolyte, packaged as specified, shall be packed in fiber- Alternatively, electrolyte packaged as specified shall be packed in wood 5.2.2.5 Consolidated ackin . Items specified in 5.2.2.3, when supplied wit
20、h a complete battery, may be consol E-rp dated within a single shipping container provided the items are segregated by intermediate packing utilizing fiberboard boxes. The container(s) shall be provided with two index lists completely itemizing and identifying the container contents. One copy shall
21、be placed inside the container in a location offering ease of accessibility and removal. One copy shall be attached to the exterior side or end of the container in a protected location which will prevent loss or damage to the list during ahipment and storage. Lists shall be enclosed in a waterproof
22、sealed bag or envelope. 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DOD-(2-24594 (SH) 5.2.3 Level C. 5.2.3.1 Cells. Cells shall be packed as specified in 5.2.2.1 and 5.2.2.2. 5.2.3.2 Re air partsL accessories, and electro1 te. Repair parts, ac
23、cessories, and electrolyte, p procedures and reports furnished to the contracting activity shall be prepared for shipment in accord- ance with level C requirements (see 5.1.2 and 5.2.3). 6. NOTES 6.1 Intended use. Cells covered by this specification are intended for use in the deep submergence vehTl
24、es, 6.2 Ordering data. 6.2.1 Acquisition requirements. Acquisition documents should spec Title, number, and date of this specification. Group numbers and quantity of cells per group (see 3.4.11 Mercury substitute, if required (see 3.4.12). Address for shipment of the cells (see 3.6.1). Address for s
25、hipment of the spare cells (see 3.6.1). Total number of cells to be delivered (see 3.6.1). fy the following: Address for shipment of repair parts and quantity (see 3.6.2). Address for shipment of accessories, and quantity if accessories If engineering services are required and the maximum number of
26、Quality assurance requirements (see 4.1.1). Address for shipment of first article, when required, and sample Level of preservation-packaging and methods required (see 5.1). Level of packing and methods required (see 5.2). Special marking required (see 5.3). When preservation-packaging, packing, and
27、marking drawings are are required (see 3.6.3). mandays allowed (see 3.7) . cells to a Government laboratory (see 4.5.3.10). required (see 5.4). 11 /. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DOD-C-24594 (SH) 6.2.2 Data re uirements. When this
28、specification is used in a contract which invokes the provisiox *merits for Data“ of the Defense Acquisition Regulation (DAR) , the data identified below, which are required to be developed by the contractor, as specified on an approved Data Item Description (DD Form 1664), and which are required to
29、 be delivered to the Government, should be selected and specified on the approved Contract Data Require- ment List (DD Form 1423) and incorporated in the contract. When the provisions of the nRequirements for Data“ of the DAR are not invoked in a contract, the data required to be developed by the co
30、ntractor and required to be delivered to the Government should be selected from the list below and specified in the contract. Paragraph 3.7 3.9.1 and 5.4 3.10 3.11 3.11 3.12 4.6.1.1 4.6.2.1 4.6.2.2, 4.6.2.3, 4.6.2.4, and 4.6.2.5 Data requirements Report, contractor engineering and technical services
31、 (CETS) Drawings, engineer- ing and associated lists Technical publica- tions for advanced development programs Plan, milestone (type II) for critical supply contracts Report, milestone (type II) Engineering change proposals (ECPs) and requests for deviations and waivers (long form) Procedures, test
32、 First article inspection report Reports , test Applicable DID Option UDI-E-2 31 27 - DI-E-7031 Level 2 Design activity designation - Drawing number - contractor contractor DI -M- 6 1 5 7 - UDI-A-23015 UD1 -A-230 18 DI -E-20 37 UDI-T-23732 DI-T-4902 DI-T-2072 (Copies of data item descriptions requir
33、ed by the contractors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting officer. Unless otherwise indicated, the issue in effect on date of invitation for bids or request for proposal shall apply.) 6.2.2.1 The data re
34、quirements of 6.2.2 and any task in section 3, 4, or 5 of the specification required to be performed to meet a data requirement may be waived by the contracting/acquisition activity upon certification by the offeror that identical data were submitted by the offeror and accepted.by the Government und
35、er a previous contract for identical item acquired to this specification. This does not apply to specific data which may be required for each contract regardless of whether an identical item has been supplied previously (for example, test reports). reserves therig-aivethe requirement for samples for
36、 first article inspection as to those bidders offering a product which has been previously acquired or tested by the Government, and that bidders offering such products, who wish to rely on such production or test, must furnish evidence with the bid that prior Government approval is presently approp
37、riate for the pendihg contract. as specified in 6.4.1 through 6.4.4. 6.3 First article ins ection. Invitations for bids should provide that the Government 6.4 Guarantee. The guarantee of the cell when series-connect as a battery shall be 12 Provided by IHSNot for ResaleNo reproduction or networking
38、permitted without license from IHS-,-,-DOD-C-2q59q LI W 9999906 0089831 9 M)D-C-24 594 (SHI 6.4.1 Nothing in the following guarantee provision shall limit any of the rights afforded to the Government by the provisions of the inspection clause including those pro- visions relating to latent defects,
39、fraud, or gross mistakes that amount to fraud. This guarantee applies notwithstanding inspection and acceptance by the Government or any pro- vision of the contract concerning the conclusiveness thereof. The contractor guarantees the performance of the battery in terms of service operating condition
40、s (months of service or total Ah output) when the battery is operated and maintained in accordance with the service manual. whichever occurs first, before the battery capacity drops to 50 percent of rated capacity as specified herein, when tested at any rate in table I and subject to the temperature
41、 limitations of this specification. The battery shall be guaranteed for 18 months or to deliver 40,000 Ah, The period of the guarantee shall begin: (a) Date the cells are filled and formed in accordance with the manufacturers (b) 24 months after acceptance of the sample cell test report in accordanc
42、e instructions, or with 4.6.2.2, whichever occurs first. 6.4.2 In the event of a failure of the battery or at least five cells, as specified in 6.4.3 the contractor shall: (al When battery capacity drops below 70 percent of rated capacity as specified herein, when tested at any rate in table I and s
43、ubject to the temperature limitations of this specification within the first 12 months or 26,000 Ah, whichever occurs first, the contractor shall replace the total battery, with a new unused battery manufactured in accordance with these specifications at no cost to the Government. life of 18 months
44、or 40,000 Ah, whichever occurs first the contractor shall indemnify the Government on a pro-rata basis (proportionately) for months of service not obtained or total Ah output not obtained, whichever is smaller. (If P being the purchase price of the battery, N the number of months not obtained A the
45、total Ah output not obtained, the smaller of the two numbers Pli5 and P 40ooo shall be used.) (b) After the period specified in (a) and prior to the end of the guarantee N 6.4.3 The battery shall be considered failed in the following cases: When grounds develop which cannot be corrected by the contr
46、actor to meet the requirements of the service manual. action by the contractor shall be at his own expense. When the battery minimumvoltage specified in table I limits battery capacity to a percentage specified in 6.4.2 and cannot be restored by contractor corrective action which will be at his own
47、expense. When five or more cells fail as defined below: be considered failed in the following cases: The cell is internally shorted. The cell limits the battery capacity to a percentage specified in Corrective 6.4.2 and has to be removed in order to raise the overall battery capacity. the system. Th
48、e cell develops leaks through cracks, thus causing grounds in 6.4.4 The same guarantee requirements of life, total Ah output, minimum capacity and indemnification specified in 6.4.1, 6.4.2 and 6.4.3 shall apply to each spare cell individ- ually, whether wet or dry. Nothing in 6.4 diminishes the Gove
49、rnments rights as contained in any other provision of the contract, including but not limited to inspection. cells when such shipments comply with section 173.260(e), parts (i) through (4) of Title 49 DOT Regulations. Contracts or orders shall contain a statement requiring exclusive use of the carrier vehicle as follows: 6.5 The packaging and packing requirements of DOT are exempted for shipments of filled “Special handling with exclusive use and through service shipment required or (fill in a
