1、MIL-R-81574(AS)AMENDMENT 27 May 2001SUPERSEDINGAMENDMENT 17 March 1975MILITARY SPECIFICATIONRESCUE HAND TOOL, PNEUMATICThis amendment forms a part of Military Specificatio n MIL-R-81574(AS), dated 1 July 1968and is approved by the Naval Air Systems Command, Department of the Navy and is available fo
2、ruse by all Department and Agencies of the Department of Defense.PAGE 2* 3.1: Delete.PAGE 4* 4.2(a): Delete.PAGE 5* 4.3: Delete.PAGE 94.6.4: Delete and substitute:“4.6.4. Operation . The rescue hand tool shall be pressurized, using a nitrogen cylinder,submerged in one foot of water and operated. The
3、 rescue hand tool shall meet the requirementsspecified in 3.7.3.”AMSC N/A 1 of 2 FSC 4240DISTRIBUTION STATEMENT A . Approved for public release; distribution is unlimited.INCH-POUNDINACTIVE FOR NEW DESIGN AFTER 30 JULY 1997Provided by IHSNot for ResaleNo reproduction or networking permitted without
4、license from IHS-,-,-MIL-R-81574(AS)AMENDMENT 22PAGE 11* 6.2(c): Delete and substitute: “When first article is required (see 3.2).”* 6.3: Delete.NOTE: The margins of this amendment are marked with asterisks to indicate where changes fromthe previous amendment were made. This was done as a convenienc
5、e only and the Governmentassumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractorsare cautioned to evaluate the requirements of this document based on the entire contentirrespective of the marginal notations and relationship to the last previous amendment.Preparing activity:Navy - AS(Project No. 4240-N260)Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
