1、MIL-STD-1322 -51 81 M 7777711 007101 O M f s -3 7- MILITARY STANDARD MIL-STD-1322-51 (NAVY) 16 APRIL 1982 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT BOMB, PRACTICE BDU-48/B UNIT LOADDATA DODIVNALC 962 NUMBER OF BOMBS PER CONTAINER . .:. . 4 20 NUMBER OF BOMBS PER UNIT LOAD 80 GROSS WEIGHT OF ONE C
2、ONTAINER (APPROX.) 40 LBS. WEIGHT OF PALLET . W LBS. GROSS WEIGHT OF UNIT LOAD (APPROX.) . 930 LES. A CUBE _. 37.6 CU. FT. NUMBER OF CONTAINERS PER UNIT LOAD . DO NOT USE FOR SHIPPING PURPOSES DO NOT STACK MORE THAN 3 UNIT LOADS HIGH IN STORAGE CONTAINER, 1.5 CUBE DWG. NO. 923AS556 NOTES: 1. 2. UNLE
3、SS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES, FOR CROSS REFERENCE TO ASSOCIATED TRUCKLOADING, CONTAINERLOADING AND CARLOADING MILITARY STANDARDS, REFER TO INDEX TO STANDARDS, MIL-HDBK-236 (NAVY) REQUIREMENTS FOR CONSTRUCTION OF THIS UNIT LOAD SHALL CONSIST OF THIS DOCUMENT AND THE LATEST THIS UNI
4、T LOAD IS AUTHORIZED AND RELEASED FOR THE PREPARATION OF UNIT LOADS FOR DOMESTIC AND OVERSEAS SHIPPING, NAVAL WEAPONS HANDLING C WPNSTA EARLE NEW JERSEY Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-STD-3322 -51 3 7777713 0073042 2 W 29 I 1/2
5、j_. MIL-STD-1322-51 (NAVY) PALLETIZING PROCEDURE (a) (b) PLACE STRAPPING, ITEM 2, UNDER PALLET DECK, ITEM 1, AS SHOWN IN DETAIL A. POSITION THE CONTAINERS ON THE PALLET DECK AS SHOWN AND POSITION THE EDGE PROTECTORS. POSITION STRAPPING, ITEM 3, UNDER THE PALLET DECK AND AROUND THE UNIT LOAD, TENSION
6、 AND DOUBLE NOTCH SEAL, ITEM 4. POSITION STRAPPING, ITEM 2, AROUND THE UNIT LOAD. TENSION THE STRAPPING AND DOUBLE NOTCH SEAL. (c) U) MARKING: IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT OR ORDER, THE UNIT LOAD SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-1322. DEPALLETIZING PROCEDU (a) CU
7、T AND REMOVE STRAPPING (b) REMOVE EDGE PROTECTORS. (c) REMOVE CONTAINERS. IOTES: , WHEN MIL-P-15011 PALLET IS NOT AVAILABLE, WOOD PALLET NN-P-71, TYPEY, SIZE2, GROUPII,IIIOREMAY BE USED. COLD ROLLED, HEAT TREATED .O31 STRAPPING MAY BE USED. . . UNLESS OTHERWISE SPECIFIED ALL MATERIAL SHALL BE IN ACC
8、ORDANCE WITH MIL-STD-1322. ASTM STD D-3950-80, TYPE E5/8 X .O30 POLYESTER STRAPPING AND APPROPRIATE SEALS MAY BE SUBSTITUTED. FIVE (5) LATERAL STRAPS AND FOUR (4) LONGITUDINAL STRAPS SHALL BE USED. LONGITUDINAL STRAPPING IS PREPOSITIONED ON TOP OF PALLET DECK PRIOR TO POSITIONING CONTAINERS AND PASS
9、ES UNDER BOTTOM CONTAINERS AND OVER TOP CON- TAINERS. . EDGE PROTECTOR SEE NOTE 3 STRAPPING SEE NOTES 2 8.3 :24Fr6035 STRAPPING SEE NOTES 2 8. 3 3/4 X .O35 X 14 FT SEE NOTE 1 40 X 46 X 5 1/2 PALLET * DESCRI PT I O N MAT IL/ D W G DI ME N SI O N ! I LIST OF MATERIALS REVIEW ACTIVITY: NAVY-AS, OS PREPARING ACTIVITY: , NAVY-OS (PROJECT NO. 8140-N521 PAGE 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
