NBN 584-1961 0000 《牛奶的总的酸度测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 2122-1996 Washers flat in aluminium alloy anodized or chromated《经阳极电镀或铬酸盐处理的扁平铝合金垫圈》.pdf

BS EN 2126-1992 Aluminium alloy AL-P7075-T651 - Plate 6 mm a 80 mm《AL-P7075-T651铝合金 板材6mm＜a≤80mm》.pdf

BS EN 2127-1992 Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D 100 mm《AL-P7075-T73511铝合金 a或D≤100mm的挤压棒材和型材》.pdf

BS EN 2128-1992 Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm a or D 75 mm《AL-P7075-T7351铝合金 6mm≤a或D≤75mm拉制棒材》.pdf

BS EN 2130-2001 Aerospace Series - Bearings precision ball in corrosion resisting steel for instruments and equipment - Technical specification《航空航天系列 仪器和设备用耐蚀钢制轴承和精密滚珠 技术规范》.pdf

BS EN 2131-2002 Aerospace series - Plates in aluminium alloys - Thickness 6 mm a 160 mm - Dimensions《航空航天系列 铝合金板 厚度6mm 160mm 尺寸》.pdf

BS EN 2133-2010 Aerospace series Cadmium plating of steels with specified tensile strength 1450 MPa copper copper alloys and nickel alloys《航空航天系列 规定抗拉强度小于或等于1450 MPa 材质为铜 铜合金及镍合金的钢.pdf

BS EN 2134-2002 Aerospace series - Round bars extruded in aluminium and aluminium alloys - Diameter 10 mm D 220 mm - Dimensions《航空航天系列 铝及铝合金挤制圆棒 直径为10mm D 220mm 尺寸》.pdf

BS EN 2138-2000 Washers flat in steel cadmium plated《钢制镀镉扁平垫圈》.pdf