NBN T 03-489-1988 5625 Carbonaceous materials used in the production of aluminium - Sampling from cathodic blocks and prebaked anodes - General《铝生产用含碳材料 阴极碳块和预焙阳极的取样 一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESF-M4D562-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) 30% GLASS FIBER REINFORCED - SELF EXTINGUISHING TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的自熄型聚对苯二甲酸丁二醇酯(PBT) 与标准FORD.pdf

FORD ESF-M4D565-A-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) 20% GLASS FIBER REINFORCED INJECTION MOLDING COMPOUND ELECTRICAL GRADE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESF-M4D575-A-2010 POLYBUTYLENE TEREPHTHALATE (PBTP) Ti02 FILLED - HIGH LIGHT REFLECTANCE TO BE USED WITH FORD WSS-M99P1111-A 《高光发射性TI02填充的聚对苯二甲酸丁二醇酯（PBTP） 与标准FORD WSS-M99P1.pdf

FORD ESF-M4D602-A-2010 POLYPHENYLENE ETHER (PPE) HIGH IMPACT POLYSTYRENE BLEND 30% GLASS FIBER REINFORCED INJECTION MOLDING COMPOUND ELECTRICAL GRADE TO BE USED WITH FORD WSS-M99P.pdf

FORD ESF-M4D9-A-2013 ACRYLIC RESIN TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESF-M4D9-A10-2005 ACRYLIC (PMMA) MEDIUM HEAT DEFLECTION TEMPERATURE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《中等热挠曲温度丙烯酸系树脂（PMMA）成型料 与标准FORD WSS-M99P1111-A一起使用 .pdf

FORD ESF-M4E12-A-2002 PAPER CONDENSER LOW DENSITY ELECTRICAL GRADE TO BE USED WITH FORD WSS-M99P1111-A 《电工级低密度冷凝器用纸 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4E5-A-2003 PAPER KRAFT ELECTRICAL INSULATOR TO BE USED WITH FORD WSS-M99P1111-A 《电绝缘体用牛皮纸 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4G157-A-1978 SEALER LOCKING - HIGH STRENGTH - HIGH VISCOSITY《高强度和高粘度锁紧密封剂》.pdf