NBN-EN 26801-1993 3750 Rubber or plastics hoses Determination of volumetric expansion (ISO 6801 1983)《橡胶和塑料导管 单位体积膨胀测定（ISO 6801：1983）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F734-2017 Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material《航空航天用熔化胶结聚碳酸酯镶玻璃材料剪切强度的标准试验方法》.pdf

ASTM F735-2006 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method《用摆动沙袋法测定透明塑料及涂层抗磨损性的标准试验方法》.pdf

ASTM F735-2011 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method 《用摆动沙袋法测定透明塑料及涂层抗磨损行的标准试验方法》.pdf

ASTM F735-2017 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method《采用振荡砂法测定透明塑料和涂料耐磨性的标准试验方法》.pdf

ASTM F736-1995(2006) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight《用落锤冲击法测定整块聚碳酸酯薄板抗冲击性的试验方法》.pdf

ASTM F736-1995(2011) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight 《用落锤冲击法测定整块聚碳酸酯薄板抗冲击性的标准试验方法》.pdf

ASTM F736-2017 Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight《采用落锤冲击法测定整块聚碳酸酯薄板抗冲击性的标准试验方法》.pdf

ASTM F738M-2002 Standard Specification for Stainless Steel Metric Bolts Screws and Studs《不锈钢米制螺栓、螺钉及螺柱(米制)的标准规范》.pdf

ASTM F739-2007 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact《连续接触条件下穿过防护服材料的液体和气体渗透物的标准试验方法》.pdf