NBN-EN 30326-1-1994 8125 Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1 Basic requirements (ISO 10326-1 1992)《机械振动 评价车座振动实验方法 第1部分：基本要求（IS.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 2070-3-1989 en Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 3 Bar and Section《航空航天系列 铝和铝合金锻件制品 技术规范 第3部分 棒材和型材》.pdf

EN 2070-4-1989 en Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 4 Tube for Structures《航空航天系列 铝和铝合金锻件制品 技术规范 第4部分 结构用管》.pdf

EN 2070-5-1989 en Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 5 Tube Used Under Pressure《航空航天系列 铝和铝合金锻件制品 技术规范 第5部分 压力管》.pdf

EN 2070-6-1989 en Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 6 Rivet Wire《航空航天系列 铝和铝合金锻件制品 技术规范 第6部分 铆钉用线材》.pdf

EN 2070-7-1989 en Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 7 Wrought Forging Stock《航空航天系列 铝和铝合金锻件制品 技术规范 第7部分 锻坯》.pdf

EN 2071-2001 en Aerospace Series - Sheets in Aluminium and Aluminium Alloys - Thickness 0 25 mm Less Than or Equal to a Less Than or Equal to 6 mm - Dimensions《航空航天系列 铝和铝合金薄板 厚度0 2.pdf

EN 2072-2005 en Aerospace Series- Aluminium AL-P1050A- H14-Sheet and Strip 0 4 mm Less Than or Equal to a Less Than or Equal to 6 mm《航空航天系列 AL-P1050A H14 铝合金薄板材和带材 0 4 mm≤a≤6 mm》.pdf

EN 2076-1-1989 en Aerospace Series Aluminium and Magnesium Alloy Ingots and Castings Technical Specification Part 1 General Requirements (Incorporates Amendment A1 1993)《航空航天系列 铝和镁.pdf

EN 2076-2-1989 en Aerospace Series Aluminium and Magnesium Alloy Ingots and Castings Technical Specification Part 2 Ingots for Remitting《航空航天系列 铝和镁合金铸锭和铸件 技术规范 第2部分 冶炼用铸锭》.pdf