NBN-ISO 7895-1992 5625 Fa ades made of components - Tests for resistance to positive and negative static pressure generated by wind《房屋外墙 抗风产生的正负静压试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS K F0 082-1989 Grains of iamon and cublc boron nitrIde for bonded abrasive products Hatbod of test of macrogrits《粘结磨具用菱形和立方氮化硼颗粒 微砾检测方法》.pdf

JUS K F1 005-1990 Bonded abrasive products Classification specification of product designation and marking《粘结模具 产品的分类、规格要求、标示和标识》.pdf

JUS K F1 006-1990 Bonded abrasive products Limit deviations and run-out tolerances《粘结模具 极限偏差和摆差》.pdf

JUS K F1 007-1990 Bon ed abrasive products Static balancing of grin ing wheels Testing《粘结磨具 砂轮的静平衡 检测》.pdf

JUS K F1 008-1990 Bonded abrasive pro ucts Safety test breaking of grinding vheels《粘结模具 砂轮破裂安全检测》.pdf

JUS K G2 120-1990 Screvv c amps《螺栓帽》.pdf

JUS K G3 070-1990 Slotted knurled round vvashers《开缝滚边圆垫圈》.pdf

JUS K G3 071-1990 Bali vvashers and cone sockets《Bali垫圈及圆锥叉口》.pdf

JUS K G3 310-1984 Key type thne-jaw drill chucks Technical reguirements《键型式三爪钻头夹盘 技术要求》.pdf