NC 09-01-103-1987 Unified Elements System of Moulds Dies Stampers and Machining Devices Moulds Threaded Inserts with Springs Design Specifications《模具统一原理系统 冲模，压模和机械装置 模具 带弹簧螺纹护套规则》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M2D348-A3-2008 POLYURETHANE ELASTOMER REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS TO BE USED WITH FORD WSS-M99P1111-A 《高的挠曲模量的反应注塑（RIM）聚氨酯弹性体 与标准FORD WSS-M9.pdf

FORD ESB-M2D348-A4-2009 POLYURETHANE (PUR) MICROCELLULAR ELASTOMER REACTION INJECTION MOLDED (RIM) PAINTABLE INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用可印刷反应注塑(RIM)聚氨酯(PU.pdf

FORD ESB-M2D350-A1-2009 SILICONE ELASTOMER INHERENTLY LUBRICATED - LIQUID INJECTION MOLDING (LIM) GRADE TO BE USED WITH FORD WSS-M99P1111-A 《液体注模（LIM）级固有润滑硅弹性体 与标准FORD WSS-M99P1.pdf

FORD ESB-M2D354-A2-2009 POLYURETHANE MICROCELLULAR ELASTOMER 15% GLASS FIBER REINFORCED - RRIM - EXTERIOR - PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用可印刷、强化反应注射成型(RRIM).pdf

FORD ESB-M2D356-B-2010 POLYURETHANE (PUR) FOAM RIGID 37 kg m3 TO BE USED WITH FORD WSS-M99P1111-A 《37 kg m3的刚性聚氨酯（PUR）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D357-A-2009 SILICONE ELASTOMER COLOR PIGMENTED - WEATHERABLE - EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用耐候型着色硅弹性体 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D362-A-2006 POLYURETHANE FOAM MOLDED TO BE USED WITH FORD WSS-M99P1111-A 《模制聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2D395-A-2009 POLYURETHANE (PUR) ELASTOMER MICROCELLULAR 11 - 12% GLASS FIBER REINFORCED RRIM EXTERIOR PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用可印刷强化反应注射成型(RR.pdf

FORD ESB-M2D67-A-2009 NEOPRENE LATEX DIP COATING TO BE USED WITH FORD WSS-M99P1111-A 《浸渍涂层乳胶氯丁橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf