NC 12-04-24-1986 Standards System for Protection Against Corrosión Paint and Varnlsh Coatings Deíermination of Acid and Alkaline Solutions Resistance《防腐蚀保护的标准系统 油漆和清漆涂层 抗酸和碱金属溶液测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 13583 9-1993 Alumina Methods for the determination of zinc oxide《铝矾土 氧化锌含量测量法》.pdf

GOST 13585-1968 Steel The bead method for determining the allowed welding and building procedures《钢 在允许条件下测定弧焊及焊缝的焊滴试验法》.pdf

GOST 13586 4-1983 Grain Methods for determination of infested grain and its damage《谷物 受侵染的谷物及其损害的测定方法》.pdf

GOST 13586 6-1993 Grain Methods for determination of infested grain《粮食 害虫感染率测定方法》.pdf

GOST 13587-1977 Non-wolen sheets and piece-goods textile Acceptance rules and sampling-method《非毛纺薄片和布织物 验收规则和取样方法》.pdf

GOST 13589-1983 Raw leather materials Skins of the far-east pinnated Specifications《制革原料 远东海豹皮 技术条件》.pdf

GOST 13591-1968 Potatoprobe weight Methods and means of verification《马铃薯探针重量 验收方法和装置》.pdf

GOST 13598-1985 Adapters for mounting taper-shanked tools Design and dimensions《锥柄工具用短型异径套筒 结构及尺寸》.pdf

GOST 13599-1978 Adapters with slot for tool cottering Desing and dimensions《机床上开口销用带槽适配器 设计和尺寸规格》.pdf