NC 18-61-1986 Passenger Transport CAP-2 Passenger SelfPropelled Wagón Main Dimensions and Parameters《乘客和商品运输 CAP-2乘客自驱动货车 主要尺寸和参数》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1272-2017 Standard Specification for Heavy Vehicular Paving Brick《供重型车辆通过的路面砖的标准规格》.pdf

ASTM C1273-2005 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures《室温下单片高级陶瓷抗拉强度的标准试验方法》.pdf

ASTM C1273-2005(2010) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures《室温下单片高级陶瓷抗拉强度的标准试验方法》.pdf

ASTM C1273-2015 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures《在环境温度下测定整体高级陶瓷抗拉强度的标准试验方法》.pdf

ASTM C1273-2018 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures.pdf

ASTM C1274-2000(2006) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption《用物理吸收法测定高级陶瓷比表面积的标准试验方法》.pdf

ASTM C1274-2010 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption《用物理吸收法测定高级陶瓷比表面积的标准试验方法》.pdf

ASTM C1274-2012 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption《用物理吸附法测定高级陶瓷比表面积的标准试验方法》.pdf

ASTM C1275-2000(2005)e1 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at .pdf