NC 54-282-1984 Construction Materials and Products Roof Paper Determination of Components Mass《建筑材料和产品 屋顶墙纸 组成块测定》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1451-2007 建筑材料及建筑构件的磨耗试验方法 (采用回转圆盘磨擦与冲击地板材料的磨耗试验方法).pdf

JIS A1452-1972 建筑材料及建筑构件的磨耗试验方法(落砂法).pdf

JIS A1415-1999 聚合物建筑材料暴露于试验室光源的方法.pdf

JIS A1470-1-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第1部分：湿度变化效应.pdf

JIS A1481-2006 建筑材料产品的石棉测定.pdf

JIS A1470-2-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第2部分：温度效应.pdf

JIS A1453-1973 建筑材料及建筑构件的磨耗试验方法(砂纸法).pdf

DL T 5388-2007 水电水利工程天然建筑材料勘察规程.pdf

猜你喜欢

ASTM F2879-2018 Standard Specification for Eye Protective Devices for Airsoft Sports《空软运动用护眼装置标准规范》.pdf

ASTM F2880-2011a Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes &x00BE in to 65 in 《公称通径管道尺寸为 x00BE 65 in 的聚乙烯压力管用搭接.pdf

ASTM F2880-2014 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3 4 in to 65 in 《公称管道尺寸为3 4英寸至65英寸的聚乙烯压力管用搭接型法兰适配器的标准.pdf

ASTM F2881 F2881M-2018 Standard Specification for 12 to 60 in [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications.pdf

ASTM F2881-2011 Standard Specification for 12 to 60 in [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications《无压雨水管用12至60 in [300.pdf

ASTM F2881-2011(2015) Standard Specification for 12 to 60 in [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications《无压暴雨排水管设施用12至.pdf

ASTM F2882 F2882M-2017 Standard Specification for Screws Alloy Steel Heat Treated 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)《最小拉伸强度170 ksi和1170 MPa(英制和公制)的热处理合.pdf

ASTM F2882-2012 Standard Specification for Screws Alloy Steel Heat Treated 170 ksi Minimum Tensile Strength《最小抗拉强度为170 ksi的热处理合金钢螺丝的标准规范》.pdf

ASTM F2883-2011 Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Ap.pdf