NC 93-15-1986 Community Hygiene Determination of Organic Matter in Soils Analysis Method《大众卫生 土壤中有机物的测定 分析方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1874-2009 Standard Test Method for Recovery of Microorganisms from Skin using the Cup Scrub Technique《用杯擦洗技术在皮肤上恢复微生物的标准试验方法》.pdf

ASTM E1874-2014 Standard Test Method for Recovery of Microorganisms From Skin using the Cup Scrub Technique《采用杯洗技术从皮肤回收微生物的标准试验方法》.pdf

ASTM E1875-2000e1 Standard Test Method for Dynamic Youngs Modulus Shear Modulus and Poissons Ratio by Sonic Resonance《利用回声共振测试动态杨氏模量、剪切模数和泊松比的标准试验方法》.pdf

ASTM E1875-2008 Standard Test Method for Dynamic Youngs Modulus Shear Modulus and Poissons Ratio by Sonic Resonance《利用回声共振测试动态杨氏模量、剪切模数和泊松比的标准试验方法》.pdf

ASTM E1875-2013 Standard Test Method for Dynamic Youngs Modulus Shear Modulus and Poissons Ratio by Sonic Resonance《使用声波共振法测定动态杨氏模量 剪切模数和泊松比的标准试验方法》.pdf

ASTM E1876-2007 Standard Test Method for Dynamic Youngs Modulus Shear Modulus and Poissons Ratio by Impulse Excitation of Vibration《用振动脉冲激励测定动态杨氏模量、剪切模数和泊松比的标准试验方法》.pdf

ASTM E1876-2009 Standard Test Method for Dynamic Youngs Modulus Shear Modulus and Poissons Ratio by Impulse Excitation of Vibration《用振动脉冲激励法测定先进陶瓷动态杨氏模量 剪切模量和泊松比的试验方法》.pdf

ASTM E1876-2015 Standard Test Method for Dynamic Youngs Modulus Shear Modulus and Poissons Ratio by Impulse Excitation of Vibration《采用脉冲激振法测定动态扬氏模量 剪切模量和泊松比的标准试验方法》.pdf

ASTM E1877-2000(2005) Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data《从热解重量分解数据计算材料的耐热性的标准规程》.pdf