NC 96-01-18-1988 Standards System for Fire Protection Port Installations Exploitation General Requirements《防火保护标准系统 港口装置开发利用 一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1170 C1170M-2008 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《使用振动台测定滚动压实混凝土的稠度和密度的标准试验方法》.pdf

ASTM C1170 C1170M-2014 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《用振动台测定碾压混凝土一致性和密度的标准试验方法》.pdf

ASTM C1170 C1170M-2014e1 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《用振动台测定碾压混凝土一致性和密度的标准试验方法》.pdf

ASTM C1170-2006 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table《使用振动台测定滚动压实混凝土的稠度和密度的试验方法》.pdf

ASTM C1171-2005 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf

ASTM C1171-2005(2011) Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf

ASTM C1171-2015 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf

ASTM C1171-2016 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories《耐火材料热冲击效应和热循环效应定量测量的标准试验方法》.pdf

ASTM C1172-2003 Standard Specification for Laminated Architectural Flat Glass《建筑用夹层平板玻璃标准规范》.pdf