1、A Joint Publication of:American Association of State Highway and Transportation Officials (AASHTO) Institute of Transportation Engineers (ITE)National Electrical Manufacturers Association (NEMA)NTCIP Standards PublicationNTCIP 1102:2004 v01.15National TransportationCommunications for ITS ProtocolOct
2、et Encoding Rules (OER) Base ProtocolA Joint Standard of AASHTO, ITE, and NEMAA Joint Standard of AASHTO, ITE, and NEMA NTCIP 1102:2004 v01.15 National Transportation Communications for ITS Protocol Octet Encoding Rules (OER) Base Protocol October 2005 Published by American Association of State High
3、way and Transportation Officials (AASHTO) 444 North Capitol Street, N.W., Suite 249 Washington, D.C. 20001 Institute of Transportation Engineers (ITE) 1099 14thStreet, N.W., Suite 300 West Washington, D.C. 20005-3438 National Electrical Manufacturers Association (NEMA) 1300 North 17th Street, Suite
4、1752 Rosslyn, Virginia 22209-3806 2005 AASHTO / ITE / NEMA. All rights reserved. Do Not Copy Without Written Permission 2005 AASHTO / ITE / NEMA NOTICES Copyright Notice 2005 by the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers
5、 (ITE), and the National Electrical Manufacturers Association (NEMA). All intellectual property rights, including, but not limited to, the rights of reproduction, translation, and display are reserved under the laws of the United States of America, the Universal Copyright Convention, the Berne Conve
6、ntion, and the International and Pan American Copyright Conventions. Except as licensed or permitted, you may not copy these materials without prior written permission from AASHTO, ITE, or NEMA. Use of these materials does not give you any rights of ownership or claim of copyright in or to these mat
7、erials. Visit www.ntcip.org for other copyright information, for instructions to request reprints of excerpts, and to request reproduction that is not granted below. PDF File License Agreement To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of an Adobe Portable
8、Document Format (PDF) electronic data file (the “PDF File”), AASHTO / ITE / NEMA authorizes each registered PDF File user to view, download, copy, or print the PDF File available from the authorized Web site, subject to the terms and conditions of this license agreement: (a) you may download one cop
9、y of each PDF File for personal, noncommercial, and intraorganizational use only; (b) ownership of the PDF File is not transferred to you; you are licensed to use the PDF File; (c) you may make one more electronic copy of the PDF File, such as to a second hard drive or burn to a CD; (d) you agree no
10、t to copy, distribute, or transfer the PDF File from that media to any other electronic media or device; (e) you may print one paper copy of the PDF File; (f) you may make one paper reproduction of the printed copy; (g) any permitted copies of the PDF File must retain the copyright notice, and any o
11、ther proprietary notices contained in the file; (h) the PDF File license does not include (1) resale of the PDF File or copies, (2) republishing the content in compendiums or anthologies, (3) publishing excerpts in commercial publications or works for hire, (4) editing or modification of the PDF Fil
12、e except those portions as permitted, (5) posting on network servers or distribution by electronic mail or from electronic storage devices, and (6) translation to other languages or conversion to other electronic formats; (i) other use of the PDF File and printed copy requires express, prior written
13、 consent. Data Dictionary and MIB Distribution Permission To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of a Data Dictionary (“DD”) or Management Information Base (“MIB”), AASHTO / ITE / NEMA extend the following permission: You may make and/or distribute unli
14、mited copies, including derivative works, of the DD or MIB, including copies for commercial distribution, provided that: (i) each copy you make and/or distribute contains the citation “Derived from NTCIP 0000 insert the document number. Used by permission of AASHTO / ITE / NEMA.”; 2005 AASHTO / ITE
15、/ NEMA Do Not Copy Without Written Permission (ii) the copies or derivative works are not made part of the standards publications or works offered by other standards developing organizations or publishers or as works-for-hire not associated with commercial hardware or software products intended for
16、field implementation; (iii) use of the DD or MIB is restricted in that the syntax fields may be modified only to reflect a more restrictive subrange or enumerated values; (iv) the description field may be modified but only to the extent that: (a) only those bit values or enumerated values that are s
17、upported are listed; and (b) the more restrictive subrange is expressed. These materials are delivered “AS IS” without any warranties as to their use or performance. AASHTO / ITE / NEMA and their suppliers do not warrant the performance or results you may obtain by using these materials. AASHTO / IT
18、E / NEMA and their suppliers make no warranties, express or implied, as to noninfringement of third party rights, merchantability, or fitness for any particular purpose. In no event will AASHTO / ITE / NEMA or their suppliers be liable to you or any third party for any claim or for any consequential
19、, incidental or special damages, including any lost profits or lost savings, arising from your reproduction or use of these materials, even if an AASHTO / ITE / NEMA representative has been advised of the possibility of such damages. Some states or jurisdictions do not allow the exclusion or limitat
20、ion of incidental, consequential or special damages, or the exclusion of implied warranties, so the above limitations may not apply to you. Use of these materials does not constitute an endorsement or affiliation by or between AASHTO, ITE, or NEMA and the user, the users company, or products and ser
21、vices of the users company. If the user is unwilling to accept the foregoing restrictions, he or she should immediately return these materials. PRL and RTM Distribution Permission To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of a Profile Requirements List (“P
22、RL”) or a Requirements Traceability Matrix (“RTM”), AASHTO / ITE / NEMA extend the following permission: (i) you may make and/or distribute unlimited copies, including derivative works of the PRL (then known as a Profile Implementation Conformance Statement (“PICS”) or the RTM, provided that each co
23、py you make and/or distribute contains the citation “Based on NTCIP 0000 insert the document number PRL or RTM. Used by permission. Original text (C) AASHTO / ITE / NEMA.”; (ii) you may not modify the PRL or the RTM except for the Project Requirements column, which is the only column that may be mod
24、ified to show a products implementation or the project-specific requirements; and (iii) if the PRL or RTM excerpt is made from an unapproved draft, add to the citation “PRL (or RTM) excerpted from a draft document containing preliminary information that is subject to change.” This limited permission
25、 does not include reuse in works offered by other standards developing organizations or publishers, and does not include reuse in works-for-hire, compendiums, or electronic storage devices that are not associated with commercial hardware or software products intended for field installation. A PICS i
26、s a Profile Requirements List which is completed to indicate the features that are supported in an implementation. Visit www.ntcip.org for information on electronic copies of the MIBs, PRLs, and RTMs. Do Not Copy Without Written Permission 2005 AASHTO / ITE / NEMA Content and Liability Disclaimer Th
27、e information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the developme
28、nt of this document. AASHTO, ITE, and NEMA standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interes
29、t in the topic covered by this publication. While AASHTO, ITE, and NEMA administer the process and establish rules to promote fairness in the development of consensus, they do not write the document and they do not independently test, evaluate, or verify the accuracy or completeness of any informati
30、on or the soundness of any judgments contained in their standards and guideline publications. AASHTO, ITE, and NEMA disclaim liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resul
31、ting from the publication, use of, application, or reliance on this document. AASHTO, ITE, and NEMA disclaim and make no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this
32、document will fulfill any of your particular purposes or needs. AASHTO, ITE, and NEMA do not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, AASHTO, ITE, and N
33、EMA are not undertaking to render professional or other services for or on behalf of any person or entity, nor are AASHTO, ITE, and NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as
34、appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or
35、 information not covered by this publication. AASHTO, ITE, and NEMA have no power, nor do they undertake to police or enforce compliance with the contents of this document. AASHTO, ITE, and NEMA do not certify, test, or inspect products, designs, or installations for safety or health purposes. Any c
36、ertification or other statement of compliance with any health or safetyrelated information in this document shall not be attributable to AASHTO, ITE, or NEMA and is solely the responsibility of the certifier or maker of the statement. Trademark Notice NTCIP is a trademark of AASHTO / ITE / NEMA. All
37、 other marks mentioned in this document are the trademarks of their respective owners. NTCIP 1102:2004 v01.15 Page i 2005 AASHTO / ITE / NEMA Do Not Copy Without Written Permission ACKNOWLEDGEMENTS This publication was prepared by the NTCIP Base Standards and Protocols Working Group (BSP WG), a subd
38、ivision of the Joint Committee on the NTCIP. The Joint Committee is organized under a Memorandum of Understanding among the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (ITE), and the National Electrical Manufacturers Associat
39、ion (NEMA). The Joint Committee on the NTCIP consists of six representatives from each of the standards organizations, and provides guidance for NTCIP development. At the time that this document was prepared, the following individuals were the members of the NTCIP BSP WG: Robert De Roche (Chair) Bud
40、 Kent Alexis Mousadi Brian Paulsmeyer Joerg Nu Rosenbohm Sonja Sun Kenneth Vaughn Hoi Wong Other individuals providing input to the document include: Blake Christie Ken Earnest Gary Meredith In addition to the many volunteer efforts, recognition is also given to those organizations who supported the
41、 effort of the working group by providing comments and funding for the standard, including: Caltrans Econolite Control Products, Inc. ITERIS Inc. Mitretek Ontario Ministry of Transport PB Farradyne, a Division of Parsons Brinckerhoff Quade Douglas, Inc. Peek Traffic Systems, Inc. Pennsylvania DOT Si
42、emens ITS - Eagle Traffic Control Systems Southwest Research Institute (SWRI) VHB Virginia DOT U.S. Department of Transportation Federal Highway Administration NTCIP 1102:2004 v01.15 Page ii Do Not Copy Without Written Permission 2005 AASHTO / ITE / NEMA FOREWORD This document defines a base standar
43、d for encoding rules that are to be used in conjunction with Application Layer protocols defined in separate standards. There is one informative annex to this document. This document is an NTCIP Protocol Base Standard standards publication. Protocol Base Standards define the basic details of data ha
44、ndling. A Joint NTCIP Protocol Base Standard standards publication is equivalent to these document types at the standards organizations: AASHTO Standard Specification ITE Software Standard NEMA Standard For more information about NTCIP standards, visit the NTCIP Web site at http:/www.ntcip.org. User
45、 Comment Instructions The term “User Comment” includes any type of written inquiry, comment, question, or proposed revision, from an individual person or organization, about any part of this standard publications content. A “Request for Interpretation” of this standard publication is also classified
46、 as a User Comment. User Comments are solicited at any time. In preparation of this NTCIP standards publication, input of users and other interested parties was sought and evaluated. All User Comments will be referred to the committee responsible for developing or maintaining this standards publicat
47、ion. The committee chairperson, or their designee, may contact the submitter for clarification of the User Comment. When the committee chairperson or designee reports the committees consensus opinion related to the User Comment, that opinion will be forwarded to the submitter. The committee chairper
48、son may report that action on the User Comment may be deferred to a future committee meeting and/or a future revision of the standards publication. Previous User Comments and their disposition may be available for reference and information at www.ntcip.org. A User Comment should be submitted to this
49、 address: NTCIP Coordinator National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752 Rosslyn, Virginia 22209-3806 fax: (703) 841-3331 e-mail: ntcipnema.org A User Comment should be submitted in the following form: Standard Publication number and version: Page: Paragraph or Clause: Comment: Please include your name, organization, and address in your correspondence. NTCIP 1102:2004 v01.15 Page iii 2005 AASHTO / ITE / NEMA Do Not Copy Without Written Permission Approvals This standards
