NEN 11157-1993 Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment (IEC 1157 1992)《IEC 1157-1992 医疗诊断用超波设备的声输出说明要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5884-2004a(2010) 0625 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes《内增强地膜扯裂强度测定的标准试验方法》.pdf

ASTM D5885 D5885M-2015 2723 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry《采用高压差示扫描量热法的聚烯烃土工合成织物的氧.pdf

ASTM D5885 D5885M-2017 red 1875 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry《采用高压差示扫描量热法测定聚烯烃土工合.pdf

ASTM D5885-2006 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry《用高压差示扫描量热法测定聚烯烃土工合成织物的氧化感应时间的标准试验方法.pdf

ASTM D5885-2006(2012) 6875 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry《利用高压差示扫描量热法测定聚烯烃土工合成织物的氧.pdf

ASTM D5886-1995(2006) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications《透过特殊用途土工薄膜的流体渗透率测试方法选择的标准指南》.pdf

ASTM D5886-1995(2011) 6250 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications《透过特殊用途地膜的流体渗透率测试方法选择的标准.pdf

ASTM D5886-1995(2018) 0000 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications《特定应用中测定流体透过土工膜速率的试验方法选择.pdf

ASTM D5887 D5887M-2016 red 4777 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter《采用柔性壁渗透计测量通.pdf