NEN 2545-1967 Packing rings for flttings for gas condults《气管连接用密封环》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 4541-1979 Metallic and other non-organic coatings - Corrodkote test (CORR test)《金属和其它无机物覆层 涂膏耐蚀试验(CORR试验)》.pdf

BS EN ISO 4543-1995 Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions《金属镀层和其它无机物涂层 储存腐蚀试验一般规程》.pdf

BS EN ISO 4566-1995 Small craft with inboard engine - Propeller shaft ends and bosses with 1 10 taper《舱内机小艇 锥度为1 10螺旋浆轴端和轴毂》.pdf

BS EN ISO 4577-1999 Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method《塑料 聚丙烯和丙烯共聚物 空气中热氧化稳定性的测定 烘箱法》.pdf

BS EN ISO 4589-1-2017 Plastics Determination of burning behaviour by oxygen index General requirements《塑料 通过氧指数测定其燃烧性 一般要求》.pdf

BS EN ISO 4589-2-2017 Plastics Determination of burning behaviour by oxygen index Ambient-temperature test《塑料 通过氧指数测定其燃烧性 室温试验》.pdf

BS EN ISO 4589-3-2017 Plastics Determination of burning behaviour by oxygen index Elevated-temperature test《塑料 通过氧指数测定其燃烧性 第3部分 高温试验》.pdf

BS EN ISO 4590-2016 Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells《硬质泡沫塑料 开孔和闭孔泡沫的容积百分比的测定》.pdf

BS EN ISO 4597-1-2008 Plastics - Hardeners and accelerators for epoxy resins -Part 1 Designation《塑料 环氧树脂的硬化剂和加速剂 第1部分 命名》.pdf