NEN-ISO 8740-1992 Grooved pins Full-length parallel grooved with chamfer (ISO 8740 1986)《ISO 8740-1986 槽销 带倒角及全长平行沟槽》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 2820.6-1997 往复式内燃机驱动的交流发电机组 第6部分 试验方法.pdf

GB T 2821-1992 齿轮几何要素代号.pdf

GB T 2822-1981 标准尺寸.pdf

GB T 2826-1981 每米38-50公斤钢轨用垫板技术条件.pdf

GB T 2828-1987 逐批检查计数抽样程序及抽样表(适用于连续批的检查).pdf

GB T 2828.1-2003 计数抽样检验程序 第1部分;按接收质量限(AQL)检索的逐批检验抽样计划.pdf

GB T 2829-1987 周期检查计数抽样程序及抽样表(适用于生产过程稳定性的检查).pdf

GB T 2830-1981 数据交换用盘式穿孔纸带的一般要求.pdf

GB T 2831-1981 光学零件的面形偏差 检验方法(光圈识别).pdf