NF A91-114-1995 Metallic coatings Measurement of coating thickness Profilometric method 《金属镀层 镀层厚度的测量 表面光度仪法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C581-2003 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service《液体设备用的玻璃纤维增强结构用热固.pdf

ASTM C581-2003(2008)e1 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service《液体设备用的玻璃纤.pdf

ASTM C581-2015 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service《测定液体设备用玻璃纤维增强结构的热.pdf

ASTM C582-2002 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment《耐腐蚀设备用接触模压的增强热塑性层压材料标准规范》.pdf

ASTM C582-2009 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment《耐蚀设备用接触模塑增强热固塑料层压材料的规格》.pdf

ASTM C582-2009(2016) Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment《耐腐蚀性设备接触模制增强热固性塑料(RTP)层压板的标准规格》.pdf

ASTM C583-2005 Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures《高温下耐火材料破裂模数的标准试验方法》.pdf

ASTM C583-2005(2009) Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures.pdf

ASTM C583-2010 Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures《在高温下耐火材料的挠折模量用标准试验方法》.pdf