NF B51-012-1942 Wood Shear test 《木材 剪切试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 26473 9-1985 Vanadium base alloys and alloying elements Method for determination of phosphorus《钒基合金和中间合金 磷测定法》.pdf

GOST 26474-1985 Diamond and extra-hard composite material drill bits and core bits Types and main dimensions《钻探用金刚冲击钻头和超硬质材料冲击钻头 型式及基本尺寸》.pdf

GOST 26475-1985 Iron and manganese ore products Terms and definitions《铁矿石和锰矿石产品 术语和定义》.pdf

GOST 26476-1985 Turning toolholders and catridges with mechanically clamped indexable inserts Symbols《车刀和可换多刃刀片机械紧固式车刀 代号》.pdf

GOST 26478-1985 Double-pass square broaches for holes with sides from 10 to 12 mm Design and dimensions《边长10mm～12mm方孔用两次拉削的拉刀 结构及尺寸》.pdf

GOST 26479-1985 Double-pass square broaches for holes with sides from 12 5 to 60 mm Design and dimensions《边长12 5mm～60mm方孔用两次拉削的拉刀 结构及尺寸》.pdf

GOST 26480-1985 Square broaches for holes with sides from 25 to 41 mm Design and dimensions《边长25mm～41mm方孔用的拉刀 结构及尺寸》.pdf

GOST 26482-1990 Previously reduced iron ores concentrates agglomerates and pellets Method for the determination of metallic iron《铁矿、精选矿、烧结矿和碎矿石、初脱氧 铁含量测定法》.pdf

GOST 26483-1985 Soils Preparations of salt extract and determination of its pH by CINAO method《土壤 盐浸出物的制备和用ЦИНАО法测量其pH值》.pdf