CNS 7264-1981 Method of Test for Plastic Bobbins for Ring Spinning Flame《环锭精纺机用塑料筒管检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4629-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=100~180mm（大孔）.pdf

HB 463-1984 HTB-3焊条技术条件.pdf

HB 4630-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=200~315mm（大孔）.pdf

HB 4631-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=100~180mm（小孔）.pdf

HB 4632-1992 焊硬质合金刀片的镶齿三面刃铣刀 D=200~315mm（小孔）.pdf

HB 4633-1992 加工高强度钢MJ螺纹螺栓用滚丝轮 54-12型 d=3~39mm p=0.5~2mm.pdf

HB 4634-1992 加工高强度钢MJ螺纹螺栓用滚丝轮 45-12型 d=3~22mm P=0.5~1.5mm.pdf

HB 4635-1992 加工高强度钢MJ螺纹螺栓用滚丝轮 45-8型 d=3~8mm P=0.5~1mm.pdf

HB 4636-1992 加工高强度钢MJ螺纹螺栓用滚丝轮技术条件.pdf