NF C03-251-1993 Preparation of documents used in electrotechnology Part 1 general requirements 《电工技术用文件的编制 第1部分 一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASD-STAN PREN 3489-1988 Aerospace Series Steel FE-PA13 Softened 500 Less Than or Equal to Rm Less Than or Equal to 750 MPa Tubes for Structures 0 5 Less Than or Equal to a Less Tha.pdf

ASD-STAN PREN 3490-1998 Aerospace Series Steel FE-PL3901 (X15CrNi17-3) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 200 mm 900 MPa Less Than or Equal.pdf

ASD-STAN PREN 3491-1998 Aerospace Series Steel FE-PL3901 (X15CrNi17-3) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 100 mm 900 MPa Less Than or Equal to Rm Le.pdf

ASD-STAN PREN 3492-1988 Aerospace Series Steel FE-PM44 Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm (Issue P 1)《航空航天系列 De≤150mm的钢FE-PM44的淬火与回火处理的切削加工用棒材 .pdf

ASD-STAN PREN 3493-1988 Aerospace Series Steel FE-PL48 Hardened and Tempered 1050 Less Than or Equal to Rm Less Than or Equal to 1250 MPa Forgings De Less Than or Equal to 40 mm (I.pdf

ASD-STAN PREN 3494-1995 Aerospace Series Titanium Alloy TI-P19001 Grade 2 Solution Treated and Aged Forgings De Less Than or Equal to 75 mm (Edition P 2)《航空航天系列 De≤75mm的钛合金TI-P1900.pdf

ASD-STAN PREN 3495-1995 Aerospace Series Titanium Alloy TI-P19001 Grade 2 Annealed Forgings De Less Than or Equal to 150 mm (Edition P 2)《航空航天系列 De≤150mm的钛合金TI-P19001制2级退火锻件 第P2版》.pdf

ASD-STAN PREN 3496-1995 Aerospace Series Titanium TI-P99003 Grade 2 Annealed Forgings De Less Than or Equal to 150 mm (Edition P 2)《航空航天系列 De≤150mm的钛合金TI-P99003制2级退火锻件第P2版》.pdf

ASD-STAN PREN 3497-1993 Aerospace Series Titanium TI-P99001 Annealed Sheet and Strip Cold Rolled a Less Than or Equal to 6 mm 290 MPa Less Than or Equal to Rm Less Than or Equal to.pdf