NF C83-403-803-2006 Detail Specification rectangular connectors - Flat contacts 0 8 mm thickness locking screw not detachable 《详细规范 矩形连接器 带不可拆卸锁紧螺钉的0 8mm厚的扁平接触器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 1415-4-1970 Broaching tools round end pieces C and D《拉削刀具 圆形端件C和D》.pdf

DIN 1415-5-1970 Broaching tools rectangular shanks E and end pieces F (not vor internal splines)《拉削工具 长方柄E和端件F(不用于内花键)》.pdf

DIN 1415-6-1970 Broaching tools rectangular shanks G with perpendicular driving plane (for internal splines)《拉削刀具 带垂直驱动面的G矩形柄（内花键用）》.pdf

DIN 14151-2-2004 Rescue blankets and cushions - Part 2 Jumping sheets type 8 - Requirements testing《接跳救生设备 第2部分 8型接跳布 要求、检验》.pdf

DIN 14151-3-2016 Rescue cushions - Part 3 Jumping cushion type 16 - Requirements testing《接跳缓冲垫 第3部分 16型接跳缓冲垫 要求及试验》.pdf

DIN 1416-1971 Broaching tools design of tooth and tooth space《拉刀 齿和齿距的设计》.pdf

DIN 1417-1-1970 Broaching tools round shanks J and K with inclined driving plane《拉削刀具 带斜驱动面的圆柄J和K》.pdf

DIN 1417-2-1970 Broaching tools round end pieces L and M《拉刀 第2部分 圆端件 L 和 M》.pdf

DIN 1417-3-1970 Broaching tools rectangular shanks N with inclined driving plane (not for internal splines)《拉削刀 带倾斜驱动面的N矩形柄（不用于内花键）》.pdf