NF C93-217-1972 Components for electronic equipment Low power precision wirewound fixed resistors 《电子设备元件 小功率精密固定线绕电阻器》.pdf

相关资源

JIS C5401-3-2005 电子设备连接器.第3部分：经质量评定的矩形连接器.分规范.pdf

JIS C5401-4-001-2005 电子设备连接器.第4-001部分：有质量评定的印制电路板连接器.空白详细规范.pdf

JASO D902-1995 汽车电子设备的耐用性测试方法.pdf

JIS C5260-1996 电子设备用电位计通则.pdf

JIS C5260-2-1-2000 电子设备用电位计.第2部分空白详细规范导螺杆作动的和旋转预调电位计.评定等级E.pdf

JIS C5260-2-2-2000 电子设备用电位计.第2部分空白详细规范导螺杆作动的和旋转预调电位计.评定等级F.pdf

JIS C5260-2-2000 电子设备用电位计.第2部分分规范铅螺旋伺服和旋转预置电位计.pdf

JIS C5260-5-1-2000 电子设备用电位计.第5部分空白详细规范单匝低功率旋转电位计.评定等级E.pdf

JIS C5260-5-2-2000 电子设备用电位计.第5部分空白详细规范单匝低功率旋转电位计.评定等级F.pdf

JIS C5260-5-2000 电子设备用电位计.第5部分分规范单匝旋转低功率线绕和非线绕电位计.pdf

猜你喜欢

FORD WSS-M4D940-A2-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 18% GLASS FIBER REINFORCED HIGH IMPACT LOW GLOSS UV STABILIZED MOLDED IN COLOR INTERIOR TO BE USED WITH FORD WSS-M.pdf

FORD WSS-M4D940-A3-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 25% GLASS FIBER REINFORCED HIGH IMPACT HIGH SCRATCH RESISTANCE LOW GLOSS UV STABILIZED MOLDED IN COLOR INTERIOR TO.pdf

FORD WSS-M4D941-A1-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER MICA REINFORCED MOLDING COMPOUND LUBRICATED AND HEAT STABILIZED WITH 25% MINIMUM RECYCLED CONTENT TO BE USED.pdf

FORD WSS-M4D943-A1-2010 POLYPHTHALAMIDE + POLYPROPYLENE (PPA+PP) BLEND MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚邻苯二甲酰胺+聚丙烯（PP）混合物成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4D944-A1-2006 POLYPROPLENE (PP) HOMOPOLYMER 50% BARIUM SULFATE FILLED 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《再生料含量最低25%的50%硫.pdf

FORD WSS-M4D945-A1-1996 POLYPROPYLENE (PP) HOMOPOLYMER 25 % CALCIUM CARBONATE FILLED MOLDING COMPOUND《25%碳酸钙填充的聚丙烯（PP）均聚物成型料》.pdf

FORD WSS-M4D947-A1-2010 POLYAMIDE 66 (PA66) 30 % GLASS FIBER AND 15 % PTFE POWDER FILLED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维和15%聚四氟乙烯(PT.pdf

FORD WSS-M4D947-B1-2007 POLYAMIDE (PA) 66 25% GLASS FIBER REINFORCED IMPACT MODIFIED INTERNALLY LUBRICATED (PTFE) HEAT STABILIZED MOLDED IN COLOR MOLDING COMPOUND INTERIOR TO BE U.pdf

FORD WSS-M4D948-A1-2010 POLYCARBONATE + POLYETHYLENE TEREPHYTHALATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PET+PBT) MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf