瓷砖薄贴

1、r Normung e. V., Berlin, gestattet.ICS 83.180; 91.100.50!%8(“2612105www.din.deDIN 18157-3Ausfhrung von Bekleidungen und Belgen im Dnnbettverfahren Teil 3: ReaktionsharzklebstoffeExecution of tilings and coverings by thin mortar bed technique Part 3: Reaction resin adhesivesExcution des revtements et carrelages la procd du bain mince de mortier Partie 3: Adhsifs rsines ractivesAlleinverkauf der Normen durch Beuth。

2、r Normung e. V., Berlin, gestattet.ICS 91.100.10!%8?“2612128www.din.deDIN 18157-1Ausfhrung von Bekleidungen und Belgen im Dnnbettverfahren Teil 1: Zementhaltige MrtelExecution of tilings and coverings by thin mortar bed technique Part 1: Cement-based mortarsExcution des revtements et carrelages la procd du bain mince de mortier Partie 1: Mortiers base de cimentAlleinverkauf der Normen durch Beuth Verlag GmbH, 10772 BerlinEr。

3、r Normung e. V., Berlin, gestattet.ICS 91.100.50!%8+“2612108www.din.deDIN 18157-2Ausfhrung von Bekleidungen und Belgen im Dnnbettverfahren Teil 2: DispersionsklebstoffeExecution of tilings and coverings by thin mortar bed technique Part 2: Dispersion adhesivesExcution des revtements et carrelages la procd du bain mince de mortier Partie 2: Adhsifs dispersionAlleinverkauf der Normen durch Beuth Verlag GmbH, 10772 BerlinErsat。

4、ENT National foreword This Published Document is the UK implementation of ISO/TR 17870-2:2015. The UK participation in its preparation was entrusted to Technical Committee B/539, Ceramic tiles and other rigid tiling. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 201。

5、llowing the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the Department of Defense.1. Scope1.1 This specification covers the requirements for chemical-resistant resin grouts for filling joints of chemical-resistantbrick or。

6、ng the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This practice provides detailed information on the han-dling and proper use of chemical-resistant resin grouts forfilling joints of chemical-resistant brick or tile such as thosecovered in Specification C658.NOTE 。