ased DE00E00107002060 J. B. Huebner Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 POLYIMIDE (PI), 13% GRAP
聚酰亚胺PI的耐高温Tag内容描述:
1、ased DE00E00107002060 J. B. Huebner Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 POLYIMIDE (PI), 13% GRAPHITE POWDER/10% PTFE WSF-M4D770-A FILLED SINTERED MOLDING COMPOUND POLYIMIDE (PI), 37% GRAPHITE POWDER FILLED WSF-M4D770-A2 SINTERED MOLDING COMPOUND NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications are polyimide compounds filled with PTFE and/or graphite powders, suitable for sintering into finished parts。
2、ased DE00E00107002060 J. B. Huebner Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 POLYIMIDE (PI), 13% GRAPHITE POWDER/10% PTFE WSF-M4D770-A FILLED SINTERED MOLDING COMPOUND POLYIMIDE (PI), 37% GRAPHITE POWDER FILLED WSF-M4D770-A2 SINTERED MOLDING COMPOUND NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications are polyimide compounds filled with PTFE and/or graphite powders, suitable for sintering into finished parts。
3、ased NT00-I-10296645-016 T.P. Koch Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 POLYIMIDE (PI), 15% GRAPHITE POWDER WSP-M4D770-A3 FILLED SINTERED MOLDING COMPOUND NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a polyimide compound filled with graphite powder, suitable for sintering into finished parts. 2. APPLICATION This specification was released originally for material used for automatic transmission con。
4、69; 2003, Ford Global Technologies, Inc. Page 1 of 1 PRINTED CIRCUIT BOARD SUBSTRATE, ESF-M3L84-A POLYIMIDE (PI) FILM 1. SCOPE The material defined by this specification is a polyimide film with a thermal index of 200 C for mechanical properties and 230 C for electrical properties. 2. APPLICATION This specification was released originally for material used as the substrate for printed circuit boards in the radio. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Mat。
5、176;F)RATIONALEAMS3686A has been reaffirmed to comply with the SAE five year review policy._SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any paten。