NF E38-321-1997 Heat exchangers Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers 《热交换器 热交换器性能的定义和确定各.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI UL 252-2017 UL Standard for Safety Compressed Gas Regulators (Tenth Edition).pdf

ANSI UL 2523-2009 UL Standard for Safety Solid Fuel-Fired Hydronic Heating Appliances Water Heaters And Boilers (First Edition Reprint with Revisions Through and Including March 16.pdf

ANSI UL 2523-2013 Standard for Safety for Solid Fuel-Fired Hydronic Heating Appliances Water Heaters and Boilers《固体燃料燃烧液体循环加热的加热设备 热水器和锅炉用安全性标准 n n》.pdf

ANSI UL 2556-2015 UL Standard for Safety Wire and Cable Test Methods (Fourth Edition).pdf

ANSI UL 2560-2011 UL Standard for Safety Emergency Call Systems for Assisted Living and Independent Living Facilities (First Edition Reprint with revisions through and including Ma.pdf

ANSI UL 2561-2016 UL Standard for Safety 1400 Degree Fahrenheit Factory-Built Chimneys (Second Edition Reprint with Revisions Through and Including April 19 2018).pdf

ANSI UL 2565-2013 UL Standard for Safety Manual and Semiautomatic Metal Sawing Machines (First Edition Reprint with revisions through and including July 26 2017)《半自动金属锯切机械用安全性标准》.pdf

ANSI UL 2572-2016 UL Standard for Safety Mass Notification Systems (Second Edition).pdf

ANSI UL 2575-2011 UL Standard for Safety Lithium Ion Battery Systems for Use in Electric Power Tool and Motor Operated Heating and Lighting Appliances (First Edition Reprint with r.pdf