NF G62-013-1984 Footwear Test methods Strength of end pointgs 《鞋类 试验方法 鞋尖部强度的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M2D498-A2-2016 POLYURETHANE FOAM OPEN CELL - RETICULATED 18 CELLS 10 MM TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2D498-A1).pdf

FORD WSS-M2D500-A1-2009 POLYURETHANE FOAM CLOSED CELL STANDARD TO BE USED WITH FORD WSS-M99P1111-A 《标准闭孔聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M2D500-A2-2009 POLYURETHANE FOAM CLOSED CELL HIGH TEMPERATURE TO BE USED WITH FORD WSS-M99P1111-A 《耐高温闭孔聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSS-M2D500-A1上》.pdf

FORD WSS-M2D501-A-2009 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用热塑性弹性体（TEEE）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M2D502-A-2004 POLYURETHANE (PUR) FOAM MICROCELLULAR SHOCK AND VIBRATION ISOLATING TO BE USED WITH FORD WSS-M99P1111-A 《隔振微孔聚氨酯（PUR）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M2D504-A-2003 THERMOPLASTIC ELASTOMER STYRENE POLYOLEFIN BLOCK COPOLYMER (TES) 57 DUROMETER A HARDNESS INTERIOR OR EXTERIOR WEATHERABLE TO BE USED WITH FORD WSS-M99P1111-.pdf

FORD WSS-M2D504-A2-2009 THERMOPLASTIC ELASTOMER STYRENE POLYOLEFIN BLOCK COPOLYMER (TES) 49 DUROMETER A HARDNESS INTERIOR OR EXTERIOR WEATHERABLE TO BE USED WITH FORD WSS-M99P1111.pdf

FORD WSS-M2D505-A-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 40 DUROMETER D HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用硬度为40 D的热塑性弹性体(TES)苯乙烯嵌段共聚.pdf

FORD WSS-M2D505-A2-2003 THERMOPLASTIC ELASTOMER STYRENE POLYOLEFIN BLOCK COPOLYMER (TES) 60 DUROMETER A HARDNESS EXTERIOR APPLICATIONS TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用硬.pdf