NF L35-170-1974 Rod-ends with self-lubricating spherical bearing Long threaded shank without keyway Dimensions and loads 《带自润滑装置的球形接头 无键槽长螺纹杆 尺寸和载荷》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM G206-2011 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests《在往复磨损试验中测量活塞环形片冲撞平试样的磨损量的标准指南》.pdf

ASTM G206-2017 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests《测量往复磨损试验中防止活塞环节段运行的扁平挂片磨损量的标准指南》.pdf

ASTM G207-2011 Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers《从基准校验场地辐射强度计的传输的标准试验方法》.pdf

ASTM G208-2012 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus《使用射流冲击器评测油田和精炼厂腐蚀抑制剂的标准实施规程》.pdf

ASTM G208-2012(2016) Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus《用射流冲击器评价和鉴定油田和精炼厂腐蚀抑制剂的标准实施规程》.pdf

ASTM G209-2012 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich Chromium Molybdenum-Bearing Alloys《用于检测锻造富含镍 铬 钼轴承合金中μ相的标准实施规程》.pdf

ASTM G209-2012a Standard Practice for Detecting mu-phase in Wrought Nickel-Rich Chromium Molybdenum-Bearing Alloys《用于检测锻造富含镍 铬 钼轴承合金中μ相的标准实施规程》.pdf

ASTM G209-2013 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich Chromium Molybdenum-Bearing Alloys《用于检测锻造富含镍 铬 钼轴承合金中μ相的标准实施规程》.pdf

ASTM G209-2014 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich Chromium Molybdenum-Bearing Alloys《检测锻制高镍铬钼轴承合金多相的标准实施规程》.pdf