NF L44-520-1974 200 mm air-conditioning connections 《空调用200mm接头》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16187-1970 Sorbents Method for determination of granular composition《吸附剂 颗粒组成的测定方法》.pdf

GOST 16188-1970 Sorbents Method for determination of abrasive hardness《吸着剂 耐摩擦强度测定法》.pdf

GOST 16189-1970 Sorbents Method for reduction and dispersion of samples《吸附剂 样品简化和离差方法》.pdf

GOST 16190-1970 Sorbents Method for determination of bulk density《吸附剂 散装密度的测定方法》.pdf

GOST 16191-1970 Blanks of female dies holders of horizontal forging machines Construction and dimensions《卧式锻造机冲模压板坯料 结构及尺寸》.pdf

GOST 16192-1970 Blanks of female dies inserts of horizontal forging machines Construction and dimensions《卧式锻造机冲模镶块坯料 结构及尺寸》.pdf

GOST 16193-1970 Blanks of dies backing of horizontal forging machines Construction and dimensions《平锻机模具衬板半成品 结构和尺寸》.pdf

GOST 16194-1970 Prismatic keys of dies of horizontal forging machines Construction and dimensions《卧式锻造机冲模用棱形键 结构及尺寸》.pdf

GOST 16195-1970 Blanks of male dies holders for wedged and flanged fixing of male dies of horizontal forging machines Construction and dimensions《用楔和法兰固定卧式锻造机压模冲头用冲头板坯料 结构及尺寸》.pdf