NF P19-105-1997 Determination of flexural strength of autoclaved aerated concrete 《高压蒸养加气混凝土的弯曲强度测定》.pdf

相关资源

ASTM C1693-2011 Standard Specification for Autoclaved Aerated Concrete (AAC)《高压蒸养加气混凝土标准规范》.pdf

BS EN 679-2005 Determination of the compressive strength of autoclaved aerated concrete《高压蒸养加气混凝土的抗压强度测定》.pdf

BS EN 771-4-2011 Specification for masonry units Autoclaved aerated concrete masonry units《圬工单位规范 高压蒸氧加气混凝土圬工单位》.pdf

EN 680-2005 en Determination of the drying shrinkage of autoclaved aerated concrete《高压蒸养加气混凝土干燥收缩的测定》.pdf

EN 679-2005 en Determination of the compressive strength of autoclaved aerated concrete《高压蒸养加气混凝土抗压强度测定》.pdf

NF P19-113-1997 Determination of moisture content of autoclaved aerated concrete 《高压蒸养加气混凝土含水量的测定》.pdf

NF P19-103-1994 Determination of the dry density of autoclaved aerated concrete 《高压蒸养加气混凝土的干密度测定》.pdf

猜你喜欢

AIA NAS 143-1954 (Inactive)Washers - 4130 or Equiv. 125 000 to 145 000 psi Countersunk & Plain Types (Segments Inactive for New Design) (Use MS 20002) (Rev 4).pdf

AIA NAS 1430-1988 Pin Swage Locking Steel Protruding Head Shear Stump-Type (Rev 4) R(1993).pdf

AIA NAS 1432-1988 Pin Swage Locking Steel Protruding Head Shear Stump-Type (Rev 4) R(1993).pdf

AIA NAS 1433-1964 Radiographic Standards for Aluminum Alloy Castings (Rev 1) R(1991).pdf

AIA NAS 1434-1964 Radiographic Standards for Magnesium Alloy Castings (Rev 1) R(1991).pdf

AIA NAS 1435-1997 Terminal - Strap Cable Eye End and Fork End Rev 2.pdf

AIA NAS 1436-1442-1973 Pin Swage Locking Steel Standard and Oversize 100 Degree Shear Head Pull-Type Rev 2 R(1988).pdf

AIA NAS 1436-1973 Pin Swage Locking Steel Standard and Oversize 100 Degree Shear Head Pull-Type (Rev 2) R(1988).pdf

AIA NAS 1437-1961 Resistor Fixed Wirewound Precision High Temperature Cancelled - February 1961 (Use NAS1484).pdf