NF P43-000-2003 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements - National complement 《建筑物阀门 饮用水铜合金节流阀 试验要求 国家补充件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF L24-682-2005 Aerospace series - Shank nuts self-locking in heat resisting nickel base alloy NI-PH2601 (Inconel 718) silver plated on thread - Classification 1 550 MPa (at ambie.pdf

NF L24-683-2005 Aerospace series - Shank nuts self-locking in heat resisting nickel base alloy NI-PH1302 (Waspaloy) silver plated on thread for 60 o swage - Classification 1 210 M.pdf

NF L24-686-2005 Aerospace series - Shank nuts self-locking in heat resisting nickel base alloy NI-PH2601 (Inconel 718) silver plated - Classification 1 550 MPa (at ambient tempera.pdf

NF L24-800-2006 Aerospace series - Sleeves tubular for tension screws with flush head in corrosion resisting steel passivated (0 25 mm wall thickness) 《航空航天系列 (0 25m壁厚)钝化耐腐蚀钢制沉头拉力螺.pdf

NF L24-801-2006 Aerospace series - Sleeves tubular for shear screws with flush head in corrosion resisting steel passivated (0 25 mm wall thickness) 《航空航天系列 (0 25m壁厚)钝化耐腐蚀钢制沉头剪切螺杆用.pdf

NF L24-803-2006 Aerospace series - Sleeves tubular for tension screws with flush head in corrosion resisting steel passivated (0 50 mm wall thickness) 《航空航天系列 (0 50m壁厚)钝化耐腐蚀钢制沉头拉力螺.pdf

NF L24-804-2006 Aerospace series - Sleeves tubular for shear screws with flush head in corrosion resisting steel passivated (0 50 mm wall thickness) 《航空航天系列 (0 50m壁厚)钝化耐腐蚀钢制沉头剪切螺钉用.pdf

NF L24-963-2008 Aerospace series - Inserts thin wall self-locking - Installation and removal procedure 《航空航天系列 自锁紧薄壁插入物 安装和拆卸程序》.pdf

NF L24-965-2007 Aerospace series - Insert thin wall self-locking short in heat resisting nickel base alloy NI-PH2601 (NI-P100HT Inconel 718) silver plated on internal thread for sa.pdf