NF P98-335-2007 Urban pavements - Assembly of concrete paving blocks and flagstones of terracotta paving blocks and of natural stone paving blocks and flagstones 《城市路面 混凝土铺地块料和石板集料.pdf

相关资源

土地使用权转让合同（地块）.doc

地块项目合作开发合同.doc

地块项目合作开发合同（共同出资）.doc

共同出资合作开发地块协议书.doc

土地使用权出让地块的房屋买卖契约.doc

DB33 T 2128-2018 污染地块治理修复工程效果评估技术规范.pdf

HJ 25.5-2018 污染地块风险管控与土塘修复效率评估技术导则（试行）.pdf

HJ 25.5-2018污染地块风险管控与土塘修复效率评估技术导则（试行）.pdf

DB36 T 1176-2019 污染地块风险管控与土壤修复效果评估技术指南.pdf

DB45 T 2144-2020 工业企业重金属污染地块修复技术规范.pdf

猜你喜欢

CNS 15076-1-2007 Modular units for machine tools - Workholding pallets - Part 1 Workholding pallets up to 800 mm nominal size《工具机之模块单元－工件固定托板－第1部：标称尺度800mm以下之工件固定托板》.pdf

CNS 15076-2-2007 Modular units for machine tools - Workholding pallets - Part 2 Workholding pallets of nominal size greater than 800 mm《工具机之模块单元－工件固定托板－第2部：标称尺度800mm以上之工件固定托板》.pdf

CNS 15077-4-2007 Test conditions for machining centers - Part 4 Accuracy and repeatability of positioning of linear and rotary axes《切削中心机之检验条件－第4部：线性轴与旋转轴之定位精度与重现性》.pdf

CNS 15077-5-2007 Test conditions for machining centers - Part 5 Accuracy and repeatability of positioning of work-holding pallets《切削中心机之检验条件－第5部：工件夹持托板之定位精度与重现性》.pdf

CNS 15077-6-2007 Test conditions for machining centers - Part 6 Accuracy of feeds speeds and interpolations《切削中心机之检验条件－第6部：进给、速率与插值之精度》.pdf

CNS 15077-7-2007 Test conditions for machining centers - Part 7 Accuracy of finished test piece《切削中心机之检验条件－第7部：精加工之试件精度》.pdf

CNS 15077-8-2007 Test conditions for machining centers - Part 8 Evaluation of contouring performance in the three coordinate planes《切削中心机之检验条件－第8部：在三个坐标平面内之轮廓性能评估》.pdf

CNS 15077-9-2008 Test conditions for machining centres - Part 9 Evaluation of the operating time of tool change and pallet change《切削中心机之检验条件－第9部：刀具与托板更换之操作时间评估》.pdf

CNS 15078-2007 Method of test for determination of the oxidation stability of middle distillate fuels《中质蒸馏燃油氧化稳定性测定法》.pdf