NF S90-432-1989 Medico-surgical equipment Orthopaedic instruments Drills taps and countersink cutters for use with osteosynthese screws with asymmetrical thread and spherical under.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1198-2009 Standard Test Method for Dynamic Youngs Modulus Shear Modulus and Poissons Ratio for Advanced Ceramics by Sonic Resonance《声谐振动测定动态扬氏模量、剪切模量和泊松比的标准试验方法》.pdf

ASTM C1198-2009(2013) Standard Test Method for Dynamic Youngs Modulus Shear Modulus and Poissons Ratio for Advanced Ceramics by Sonic Resonance《声谐振动测定动态扬氏模量、剪切模量和泊松比的标准试验方法》.pdf

ASTM C1199-2000 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods《隔热箱法测定主窗设计系统的稳态热传递系数的标准试验方法》.pdf

ASTM C1199-2000(2008) Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods.pdf

ASTM C1199-2009 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods.pdf

ASTM C1199-2009e1 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods《隔热箱法测定主窗设计系统的稳态热传递系数的标准试验方法》.pdf

ASTM C1199-2012 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods《热箱法测量开窗系统的稳态热传递系数的标准试验方法》.pdf

ASTM C1199-2014 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods《热箱法测量开窗系统稳态热传递系数的标准试验方法》.pdf

ASTM C12-2007 Standard Practice for Installing Vitrified Clay Pipe Lines《安装上釉陶土管衬的标准实施规程》.pdf