NF T34-551-1995 Paints and varnishes Corrosion protection of steel structures by protective paints systems Definition and preparation of test panels 《涂料和清漆 通过涂料保护系统对钢结构的腐蚀保护 定义和试验板.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1196-2014 Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements《用液压千斤顶现场测量实心砌块抗压应力的标准试验方法》.pdf

ASTM C1196-2014a Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements《用液压千斤顶现场测量估计实心砌块抗压应力的标准试验方法》.pdf

ASTM C1197-2004 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method《用液压千斤顶法现场测量砖石建筑可变形性的标准试验方法》.pdf

ASTM C1197-2009 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method《用液压千斤顶法现场测量砖石建筑可变形性的标准试验方法》.pdf

ASTM C1197-2014 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method《用液压千斤顶法现场测量砖石建筑可变形性的标准试验方法》.pdf

ASTM C1197-2014a Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method《采用液压千斤顶法现场测量砖石工程可变形性能的标准试验方法》.pdf

ASTM C1198-2001 Standard Test Method for Dynamic Youngs Modulus Shear Modulus and Poissons Ratio for Advanced Ceramics by Sonic Resonance《声谐振测定动态扬氏模量、剪切模量和泊松比的标准试验方法》.pdf

ASTM C1198-2008 Standard Test Method for Dynamic Youngs Modulus Shear Modulus and Poissons Ratio for Advanced Ceramics by Sonic Resonance《用声谐振测定高级陶瓷的动态扬氏模量、剪切模量和泊松比的标准试验方法》.pdf

ASTM C1198-2008e1 Standard Test Method for Dynamic Youngs Modulus Shear Modulus and Poissons Ratio for Advanced Ceramics by Sonic Resonance.pdf