NF T60-172-1996 Crude petroleum and petroleum products Determination of density Oscillating U-tube method 《原油和石油产品 密度测定 振荡式 U 形管法》.pdf

相关资源

MT 39-1987 岩石真密度测定方法.pdf

JIS K6268-1998 硫化橡胶—密度测定.pdf

JIS M8717-1993 铁矿石的密度测定方法.pdf

HB 5367.7-1986 碳石墨密封材料密度测定方法.pdf

HG T 3055-2012 胶乳海绵表观密度测定.pdf

SN T 0056-1992 进口化学纤维线密度测定 振动仪法.pdf

LY T 2718-2016 人造板剖面密度测定方法.pdf

HG T 2412.3-1992 橡胶胶丝试验方法橡胶胶丝密度测定.pdf

JB T 3584-2012 超硬磨料 堆积密度测定方法.pdf

JB T 3584-1999 超硬磨料 堆积密度测定方法.pdf

猜你喜欢

FORD WSS-M4D683-A2-1995 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 40 DUROMETER D HARDNESS HEAT STABILIZED MOLDING COMPOUND《硬度为40 D的受热稳定的乙醚弹性体（TEEE）热塑性聚酯成型料》.pdf

FORD WSS-M4D684-B1-2014 ABS PC BLEND MEDIUM IMPACT STRENGTH MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D690-B1-2013 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND HIGH HEAT RESISTANT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D695-B1-2017 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND WASHER FLUID RESERVOIR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D695-B1-2018 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND WASHER FLUID RESERVOIR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D703-B1-2014 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED 35% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D703-B2-2014 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED UV STABILIZED 35% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D706-A3-2006 POLYAMIDE 66 (PA66) HEAT STABILIZED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定、冲击改性的聚酰胺66(PA66)成型料 与标准FORD WSS-M99P1111-A.pdf

FORD WSS-M4D706-A4-2006 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED WEATHERABLE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的耐候型冲击改性聚酰胺66成型料 与标准FORD WSS-M99P.pdf